Best Trailer Hitch For 2025 Kia Niro PHEV

Question

Question:

Can you please confirm that this hitch is compatible with a 2025 Kia Niro PHEV? I see confirmation for earlier years of this model, but not 2025, and I cant confirm it on the Curt website. Also, does it require any modifications on the vehicle itself, or the hitch? Thank you.

asked by: Larry

0

Expert Reply:

Hello Larry, thanks for reaching out. Yes, the Curt Class 3 Hitch # C77NR will indeed fit your 2025 Kia Niro PHEV. I double checked with Curt and they do confirm this hitch fits all models of the 2025 Kia Niro EV and this includes the PHEV model.

What will you be using the hitch for? Are you pulling a trailer?

expert reply by: Jesse M

0

C77NR Example
(click to enlarge)

Larry

9/4/2025

Jesse - Thanks for the great info. The hitch will not bend for towing, but instead for a heavy-duty bike rack that can hold two 55 pound e-bikes. I believe/hope the car can handle that load. Thanks.

Jesse M.

9/5/2025

@Larry So the # C77NR hitch has a 200 lb tongue weight capacity. With two 55 lb bikes you have 90 lbs of capacity to spare. So as long as your bike rack weighs less than 90 lbs you will be just fine.

Answer 1

While I don't know exactly what landing gear you have on your 2011 Keystone Raptor 3812 Toy Hauler, I can say that you should be able to replace them with the Landing Gear Set w/ Handle #RVLG-8HDL as this landing gear uses the standard weld mount…

view full answer...

Answer 2

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…

view full answer...

Answer 3

Most likely you need to go with the Reese Landing Gear Set #RP500708 because it has the typical inside to inside and outside to outside spacing of 15-1/2" and 17-1/2" respectively. This is the most common weld stop measurements which is why…

view full answer...

Answer 4

I went out to the warehouse and pulled one of the Pro Series Snap-Ring Swivel Jacks, #PSEJ10000101, to measure for you. I added dimensions to a photo I took of the mounting plate for you to use to see if the mounting pattern will match up to your…

view full answer...

Answer 5

We don't carry the replacement bolt you'd need for the Fulton Fold-Away Coupler Hinge Kit #FHDPB330301 but the bolt is a 5/8 inch diameter Grade 5 bolt so your best bet would be to find a nut and bolt that matches that at a local hardware…

view full answer...

Answer 6

Two dots will be displayed on your now discontinued Draw-Tite I-Command Trailer Brake Controller 5535 whenever a trailer is not connected. After 15 minutes of no motion the controller goes into power-saving mode and the display will be completely…

view full answer...

Answer 7

I attached a picture that has about every dimension you could want for the part #BD500217. The overall length is 17 inches and the diameter of the screw is 1-1/4 inches.

view full answer...

Answer 8

A specific dimensional drawing of the replacement screw and nut #BD500217 is not available for proprietary reasons. I can tell you that the diameter of the threaded parts is 1-1/4 inches. It was specifically designed for 12K Bulldog jacks, series…

view full answer...

Answer 9

Two red dots on the display of the Primus part #TK90160 indicate that the controller is on but a trailer is not detected. Since you are seeing that with multiple trailers connected you most likely have corrosion or dirt built up on the brake output…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Best Trailer Hitch For 2025 Kia Niro PHEV

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching