Dust Cap Option For A Hub Bore Of 2.325 Inches
Updated 09/12/2025 | Published 08/27/2025
Products Featured in This Question
Question:
Would you happen to sell ‘dust caps’ that will fit a hub that is 2.325?
asked by: Gregory W
Expert Reply:
Hi Gregory!
We have a few that are very close with the Fulton Grease Cap - 2.333" Outer Diameter - Drive In # F001601 and TruRyde Zinc Plated Grease Cap - 2.333" Outer Diameter - 1.00" Tall - Drive In # TRDC-233, but none that are exactly 2.325". They should fit, but will be some work driving them in.
Are these by chance a Vortex hub? We do also have the Replacement Grease Caps for Dexter/Tie Down Engineering Vortex Trailer Hubs # DX66UR, but they are threaded and quite a bit different from your average cap.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.33 Inch
- 4400 lbs Axle
- 5200 lbs Axle
- 6000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Grease Caps Dexter Tie Down Vortex - DX66UR
- Video: Installing the Pace Edwards UltraGroove Retractable Hard Tonneau Cover on a 2024 Ford F-150
- Shop: EZ Lube Grease Caps with 2.72" OD - Fits 12" x 2" Dexter 8-Bolt Hubs - Zinc - Qty
- Shop: Dexter Grease Caps with 2.446" OD - Fits 12" x 2" Hubs - Zinc-Plated Steel - Qty 2
- Shop: Tonneau Cover
- Shop: Replacement Grease Caps for Dexter/Tie Down Engineering Vortex Trailer Hubs
- Shop: Fulton Grease Cap - 2.333" Outer Diameter - Drive In
- Shop: Zinc Plated Grease Cap - 2.333" Outer Diameter - 1.00" Tall - Drive In
- Shop: Bearing Buddy Bearing Protectors - Model 2562 - Chrome Plated (Pair)
- Shop: Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Video: Bearing Buddy Bearing Protectors-BB1980T-SS Spec Review
- Q&A: What Bearing Buddy Is Closest to Correct Size for Hub Bore Diameter of 2.3125 inches
- Q&A: Does Dexter Vault System Work the Same As Bearing Buddy
- Q&A: Replacement Grease Seal Recommendation for 32372 with OD 2.325 and ID of 1.680
- Q&A: Comparing The AL84JQ And AL24JQ For A 2024 Toyota Tundra
- Q&A: How Oftern Should the RhinoFLEX Rhino Blaster # CAM39080 be Used
- Q&A: Which Bearing Buddy for 2.325 Hub Bore
- Q&A: Selecting Bearing Buddy for Ranger Trail Boat Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Lazer S.
9/12/2025
Hi Gregory, Did you have a chance to try the grease caps that are slightly larger than your hub? I'm curious to know if they worked out for you, as it could help others in a similar situation.