Steering Stabilizer that Fits 2005 Tiffin Allegro Bay34

Question

Question:

Looking a steering stabilizer for my 2005 Tiffin Allegro Bay34 workhorse chassis

asked by: Warren C

0

Expert Reply:

Hey Warren, the correct steering stabilizer you need for your 2005 Tiffin Allegro Bay34 is the Roadmaster part # RM88RR based on your chassis and GVWR. Have you done any other suspension modifications to your RV?

expert reply by: Jameson C

0

Warren C.

8/27/2025

I have not done any work to the suspension

Jameson C.

8/27/2025

@WarrenC Gotcha, if you find that you want more improvements to handling after the stabilizer (or even before) a rear sway bar will make a huge improvement. Typically the biggest improvement you can make is a better rear bar like the # RM-1259-109 that is a fit for your motorhome.

Warren C.

8/27/2025

I ordered the steering stabilizer but have not received an order number

Jameson C.

8/27/2025

@WarrenC Did you use a different email address for the order? I don't see anything in the system with your email address or name.

Answer 1

I checked with Roadmaster and the correct Roadmaster Exact Center Steering Stabilizer for a 2002 Workhorse W-22 Chassis is part #RM32RR for GVWR's over 22K or part #RM88RR for GVWR's under 22K.

view full answer...

Answer 2

I looked up your 2018 Jayco Alante 26X and the towing capacity looks to be 5,000 lbs and the GVWR is 16,000 lbs. The GVWR is the amount of weight the vehicle can weigh total at it's capacity. So that would indicate that if you had the vehicle…

view full answer...

Answer 3

The Timbren Front axle Suspension Enhancement System part #TWFRW22 is a fit for the 2003 Winnebago Adventurer 38G on the GM Workhorse chassis. I recommend to also add the rear suspension part #TWRW22. The Timbren springs are a great option to level…

view full answer...

Answer 4

The length of the Camco RV Step Cover part #CAM42935 that you referenced is 21-1/2 inches and fits most standard RV step dimensions.

view full answer...

Answer 5

Hey Tony, we have a Roadmaster Exact Center that fits your 2004 Fleetwood Southwind Workhorse chassis but the fit you need depends on if you have the W20 chassis that has a GVWR of 22k or less which means you need the part #RM88RR or if you have a…

view full answer...

Answer 6

Gina, the #ST85MR steering stabilizer was designed specifically for the 2021-up F-53, such as yours with the 7.3L V8. The mounting points and steering gear changed slightly from older years, and this model comes with the correct updated bracket kit.…

view full answer...

Answer 7

For your 7' x 16' V-Nose enclosed trailer I recommend the Adco SFS AquaShed Cover for Bumper Pull Trailer #290-46005. This is designed for trailers up to 18' long so you'll have a little bit of extra material for an easier fit. There…

view full answer...

Steering Stabilizer that Fits 2005 Tiffin Allegro Bay34

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching