Replacement Hubs for Boat Trailer With Square Axle
Updated 09/12/2025 | Published 08/26/2025
Products Featured in This Question
Question:
I want to replace the hubs on my boat trailer. I need a 5 × 4 1/2 hub. I have a 10 wheel but dont know what weight hub i need. The boat weighs 2000 lbs and the axle is a square tube 13/4 inches on each side.
asked by: David A
Expert Reply:
Hi David; if I had to guess you probably have a 2k axle on your boat trailer, could be a 3,500 lb, but we will need to identify the bearings to find the right replacement. I'm assuming you don't have an axle tag, and square axle size isn't an indicator of capacity so we can't use that either. You will need to pull a hub off and check for bearing part numbers or measure the spindle/inner diameter (ID) of your bearings. See the attached picture.
If you find you have # L44643 inner and outer bearings with an ID of 1.00" you can use the # AKIHUB-545-2-1K. If you have # L44649 inner and outer bearings with an ID of 1.063" you can use the # AKIHUB-545-2-2K. If you have a different bearing combination/measurements let me know and I'll see what else is available.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Spring Towing Readiness Checklist
- Q&A: Replacement Hub Recommendation for Tracker Boat Trailer with Spindles that Measure 1.05 inch
- Q&A: Availability Of Double Lip Grease Seal With 1.5" ID And 1.983" OD
- Q&A: Grease Seal Recommendation for Trailer to Replace 15192TC
- Q&A: Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Q&A: Locating Replacement Hubs that Use Same Inner and Outer Bearing
- Q&A: Recommended Hub For Reliable BT150A Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Tire Sizing
- Article: How to Determine Tire/Wheel Diameter
Robin H.
9/12/2025
Hi David, did you have a chance to check the bearing part numbers or measure the spindle on your boat trailer? I'm eager to help you find the right hub replacement once you have that information.