Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This setup is built for serious work and long miles. The Kenda 205/65-10 bias tire carries a 1,650-lb maximum load at 90 psi and is rated for speeds up to 87 mph (speed rating N). The matching 10" x 6" steel wheel is rated for the same capacity, giving you balanced strength and confidence when you’re covering ground or hauling heavy gear. Both meet Department of Transportation specs for highway use.
This tire arrives mounted and aired up, so it’s ready to bolt on right out of the box. The 5 on 4-1/2" bolt pattern, 2.8" pilot diameter, and 0 offset make fitment straightforward. Wheel bolt size is 1/2"-20. Owners like knowing they can swap this on quickly without a trip to the tire shop or extra mounting costs.
The steel wheel uses a corrosion-resistant powder coat over an e-coat primer to stand up to moisture and road grime. It’s designed to resist rust and keep its clean white finish season after season, even when exposed to tough conditions.
The bias construction uses thick nylon cords set at a 30- to 45-degree angle in alternating layers that crisscross through the tire body. This gives the sidewalls extra stiffness so the tire flexes evenly across uneven terrain, with solid handling and a smoother ride when trailering over rough surfaces or bumpy roads.
Rim dimensions: 10" diameter?× 6" wide
Bolt pattern: 5 on 4-1/2" Offset: 0 Pilot diameter: 2.8"
Section width: 8.4" Outer diameter (inflated): 20.4"
Load range: E Ply rating: 10 Max load: 1,650 lbs at 90 psi
Warranty: 5-year tire / limited 1-year wheel with a 1-year worry-free replacement guarantee
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Mike L.
5/21/2026
We're glad to hear that Tim, thanks!!
Nick S.
9/22/2025
Heck yeah! That is great to hear, I am glad they are holding up well on your adventures. I did a 2 week stint in the Pacific Northwest this summer, were you able to get out anywhere fun??
Brooke M.
1/13/2025
They look great! What do you haul with that trailer? I havent seen like that before
Crickett
12/31/2024
Its great. It has stayed on the back of our camper the entire time and it didnt fall off or go flat. Im not going to give credit to the tire for not falling off because it is the lug nuts that hold it on.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
11/19/2025
Glad we had the right fit to keep you rolling to the water! MMMMM Yummy Crappie!! We are located in Wentzville, MO but you can find me most weekends on the Lake of the Ozarks or Mark Twain Lake, I dabble in local bass tournaments, but greatly appreciate the crappie hole at the end of our dock! Thanks for sharing your catches with us, tight lines =)