Replacement Brakes and Hub for Flyer Pursue with a 2,200 lb Dexter Axle
Updated 09/02/2025 | Published 08/10/2025
Products Featured in This Question
Question:
Hi. I have an Intech Flyer Pursue with a Dexter 2200 lb axle. I think it currently has a 3500lb Dexter Brakes. I pulled the hub and the following is on the sticker inside the brake assembly 023-216-00 Left Hand 22303082220. The Hub has 8-247 and 14 MTI stamped into it. Do you know what I need to replace my brakes and hubs? Thanks
asked by: Kurt H
Expert Reply:
Hey Kurt, thanks for reaching out!
I see you've already picked up the 10" Dexter Electric Trailer Brakes # 23-26-27 along with the 3.5K Dexter Trailer Hub & Drum Assembly # 84546UC3-EZ, which are both exactly what you need for your trailer.
Is there anything else you're needing to replace or upgrade while you're at it?
(click to enlarge)
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Brake Drum Recommendation for InTech Flyer Chase Trailer
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly
- Video: Review of the Trailer Hub and Drum Assembly
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-150
- Q&A: Recommended 2200lb Axle That Uses 3500lb Hubs and Bearings
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb E-Z Lube Axles - 5 on 4-1/2
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Which Sidewinder Pin Box Fits 2023 Keystone Montana High Country
- Q&A: Replacement Brakes And Drums For A 7k Rated Sloan Kwik Load Trailer
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Jon G.
9/2/2025
Hey Kurt, I'm glad to hear you got the Dexter Electric Trailer Brakes and the Hub & Drum Assembly for your trailer. How did the installation go? I'm asking because your experience could really help others looking to upgrade their trailers.