Can Lippert Ground Control 3.0 Be Added to 5th Wheel With Front Hydraulic Jacks
Updated 08/18/2025 | Published 08/05/2025 >
Products Featured in This Question
Question:
Can I add Lippert Ground Control Auto Level to my 36foot fifth wheel that already has hydraulic front jacks? It does not have any auto level prep.
asked by: Lee H
Expert Reply:
Hey Lee! Yes, you can add the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control # LC675817 to your 5th wheel. You will need to remove the existing hydraulic landing gear legs and replace them with the electric jacks that come with the Ground Control 3.0. A 5th wheel does not have to be prepped to use the system.
The 6-point system is designed to fit when there will be 20' or more between the center of the landing gear footpad and the center where you will mount the rear jack. If you find that distance is less than 20' you can use the 4-point # LC358590 instead. All of the information on mounting locations for the jacks can be found in the installation instructions attached below.
Any big trips planned with your 5th wheel before summer wraps up?
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control - 6-Point Set
- Camper Jacks
- 5th Wheel Camper
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: landing gear control
- Shop: MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 18K+ Trailers w/ Lippert 1621
- Video: Convert Your 5th Wheel to Gooseneck | MORryde GooseTech 5th Wheel to Gooseneck Pin Box
- Video: Hands-On with the MORryde 3/8 Inch Goosetech Safety Chain
- Shop: MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 18K+ Trailers w/ Lippert 1116
- Shop: MORryde GooseTech 5th Wheel to Gooseneck Pin Box for Trailers Under 11.5K w/ Lippert 1716
- Shop: MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 14K to 18K Trailers w/ Lippert Rhino
- Shop: MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers w/ Lippert 1716
- Video: A Closer Look at the Replacement Manual Crank Handle for Lippert 5th Wheel RV Landing Gear
- Shop: Lippert 1716 5th Wheel Pin Box - 15,500 lbs
- Q&A: Determining Pin Box Model on 2007 Keystone Raptor for Reese 5th Airborne Replacement
- Shop: Lippert 1116 5th Wheel Pin Box - 19,000 lbs
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Suspension Enhancement
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Q&A: Recommended Lock for MORryde GooseTech 5th Wheel to Gooseneck Pin Box
- Search Results: trailer leaf springs
- Article: How to Measure for Trailer Hitch Drop




Lee H.
8/17/2025
Thanks for the reply, however, I was really wanting to know if the electric system would integrate with my existing hydraulic front jacks. I don't want to give up my hydraulic front jacks, so I suppose I'll just keep using my Andersen Hitches leveling system. I can be level left to right, front to back in less than 10 minutes. It's kind of sad and I kick myself all the time for not saying yes when we ordered ours in 2016, when the dealer asked us if we wanted to add auto level. It would have only added about $3,500 to the price when it was ordered. Now, it'll cost $10,000 to add hydraulic level up to it! Really not worth the expense for something only used 6-10 times per year.