Replacement Recommendation for UPG 42914 Trailer Breakaway Kit

Question

Question:

Hello, I have upg breakaway kit 42914 and would like to replace it. Can you recommend a product for this? Thanks

asked by: Mark

0

Expert Reply:

Hey Mark, thanks for reaching out!

I recommend using the Bright Way Trailer Breakaway Kit # 3802346 to replace your UPG 42914 unit. This has an LED light and tester just like your current system, and it also is a side load so you can mount it in the same place.

What do you think?

expert reply by: Jon G

0

Jon G.

8/15/2025

Hey Mark, did you decide to go with the Bright Way Trailer Breakaway Kit? I'm curious to know how it worked out for you, as it could really help others in a similar situation!

Answer 1

Breakaway pins are not universal, so you wouldn't be able to replace your pin with another brand. However, breakaway switches are universal, so you can mix and match them to work with your UPG Model 42914 breakaway kit. With that being said, your…

view full answer...

Answer 2

We offer break away systems from Hopkins and Tekonsha. Tekonsha uses glass mat batteries, while Hopkins uses gel filled batteries. Both types of batteries are sealed, and both manufacturers tell me that the batteries can be installed in any…

view full answer...

Answer 3

The interior lights of your trailer would be powered by the 12 volt accessory circuit on the 7-way of your 2010 GMC Sierra. You will want to check the 1:00 position of the 7-way on your truck with a circuit tester like part #PTW2993 to verify if…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Recommendation for UPG 42914 Trailer Breakaway Kit

Continue Researching