bing tracking image
Q & A Icon

Parts Needed for RV to Flat Tow Ford Maverick  

Updated 08/07/2025 | Published 07/15/2025

Question:

I have a customer that we are putting the stuff to flat tow his Ford Maverick. We have all the stuff for the car end what do we need to install on the RV to complete the install?

0

Expert Reply:

Welcome back! That depends on what already came on the motorhome and the parts you're using. Does it have a hitch and a 7-way? Those are the basic parts required on a motorhome for flat towing. If you need a hitch you could add one like the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 as long as the frame is in that range. This can handle up to 5,000 lbs so it could be used for the Maverick.

If you motorhome doesn't have a 4-way you will have to add a universal 4-way like the # C59236. Then you can use the # ETBC7 to upgrade the 4-way to the 7-way. The same kit will be used if the motorhome already has a 4-way on it. This setup does require a charge line so you will need the Roadmaster Battery Charge Line Kit for Motorhomes # RM-156-75. If it already has a 7-way check to see if a charge line is installed before picking this up.

expert reply by:
0
Robin H
Battery Charge Line Kit for Motorhomes
Battery Charge Line Kit for Motorhomes
(click to enlarge)
Robin H. profile picture

Robin H.

8/7/2025

Hey, how did everything go with setting up your Ford Maverick for flat towing? Did the hitch and wiring kits work out for your motorhome? I'm curious to know because it could really help others in a similar situation!

Yipes G. profile picture

Yipes G.

8/7/2025

@RobinH, I ended up writing to Demco and they were excellent at reply times. So I went with all Demco parts.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>