What is Capacity of Dexter EZ Flex Equalizer Kit # K71-652-00

Question

Question:

Dexter e-z Flex k71-652-06 says it is for 6,000 lbs max. Is that per axle or total weight of trailer?

asked by: Dean H

0

Expert Reply:

Hey Dean, the 6,000 lb capacity of the Dexter EZ Flex Equalizers part # K71-652-00 is the axle capacity per axle that it can be used with. So each axle can be up to a 6k rated axle basically.

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey Dean, how did the Dexter EZ Flex Suspension Kit work out for your trailer? I'm curious to know if it met your needs, as it might help others in a similar situation.

Answer 1

You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…

view full answer...

Answer 2

As long as the wet bolt that you are intending to use is the appropriate size, wet bolts can be used on the fixed side of leaf springs. You will want to make sure that the bolt is the correct diameter, length, and that there is not a clearance issue…

view full answer...

Answer 3

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

view full answer...

Answer 4

The weight capacity of the Dexter EZ Flex part #K71-653-00 that you referenced is based on the axle. So this kit is designed to have a capacity to be used with 8k rated axles so it would easily work well with your 5,200 lb axles.

view full answer...

Answer 5

I can understand why this might be confusing, and the Dexter EZ Flex #K71-652-00 will work with axles that have capacities up to 6000-lbs, so you would be under that capacity with your 3500-lbs axles. With that said, there will be some additional…

view full answer...

Answer 6

The Dexter E-Z Flex Suspension Kit part #K71-653-00 will work just fine on 3,500 axles assuming the measurements match up which in your case they do. I have spoken to Dexter about this before and the weight capacity listed is more or less a guide to…

view full answer...

Answer 7

Hey David, thanks for reaching out! I recommend replacing your current equalizers with the E-Z Flex Equalizers #K71-655-00 which are compatible with up to 8K axles. These are a great step up to standard equalizers and while they aren't crazy…

view full answer...

Answer 8

The weight capacity of the Dexter EZ Flex Kit part #K71-652-00 is per axle and not the total trailer axle capacity. So up to two 6k rated trailer axles.

view full answer...

Answer 9

What you describe isn't normal. Trailer axles are manufactured with a bow or crown in them, a slight arc with the high side on the top of the axle. When the trailer is loaded, the axle will straighten out so the tires make even contact with the…

view full answer...

Answer 10

Typically a trailer axle will have some camber in it - some bend - such that when it is not loaded the tops of the wheels bow outward slightly, with the outside edges of the tire treads making first contact with the ground. This allows that when the…

view full answer...

Answer 11

Most likely, the trailer would be rated for 7,000 pounds gross if it has two 3,500 pound axles. But there should be a sticker or plate somewhere on the frame near the front of the trailer that lists its official capacity. Also, the trailer can only…

view full answer...

Answer 12

Hey Monty, When installing hubs on an axle they should turn freely. Initially you will feel slight resistance but once the seals set it should be able to turn freely. Some things that may cause resistance could be a damage or improperly pressed…

view full answer...

What is Capacity of Dexter EZ Flex Equalizer Kit # K71-652-00

Product Page this Question was Asked From

Continue Researching