Availability of Replacement Caliper Bolts for Kodiak Calipers

Question

Question:

I need a new brake Caliper and pads for my 2018 triton bass boat trailer. One of the Caliper bolts came out. I need replacement bolts also. Thanks. Matt

asked by: Matt B

0

Expert Reply:

Hey Matt, I believe you are looking for a replacement caliper bolt for your Kodiak calipers which we have with the part # KGBS. Does that look correct?

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey Matt, did the replacement bolt for your Kodiak calipers work out for your Triton bass boat trailer? I'm curious to know if it solved your issue so I can help others in similar situations.

Answer 1

The Kodiak Disc Brake Caliper part #KDBC250E which is designed for the Kodiak Disc Brake Kit part #K2HR712E will need to be torqued to 40-50 ft. lbs. per the instructions.

view full answer...

Answer 2

Your attached photo indicates that you have an 8-lug wheel. The most common axle capacity for an 8 on 6-1/2 wheel bolt pattern is 7,000. If you do have a 7,000-lb capacity axle, your outer bearing will be #14125A, and your grease seal will either be…

view full answer...

Answer 3

While there is not a manual or video available for the Kodiak Disc Brake Caliper Rebuild Kit #KDBC225KIT I did find an expanded drawing of the parts of Kodiak Disc Brake Caliper #KDBC225S which should help so you can see how the pieces fit. The…

view full answer...

Answer 4

The Kodiak guide pins like the part #KGBS are .42 inch in diameter. The thread size is M11 x 1.5. The distance between the guide pin mounting holes is 6 inches.

view full answer...

Answer 5

According to the instructions for the Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs #K2R526S the torque spec for the caliper guide bolts is 45-50 foot pounds. I reached out to Kodiak for the mounting…

view full answer...

Answer 6

What you'll want to do is refer to your instructions for the proper torque specs. For example, the instructions for the 5.2K - 6K Kodiak Disc Brake Kit #K2HR526D call for the brake mounting flange to be welded to the spindle and then the caliper…

view full answer...

Answer 7

I reached out to my contact at Kodiak regarding the Disc Brake Kit #K2R1058D11E and he said the rotor/spacer bolts need to be torqued down to 90 foot pounds and the caliper clip bolts will be torqued down to 45 foot pounds. I have attached a video…

view full answer...

Answer 8

We do not have a direct replacement bolt for your Tie Down Engineering 46304 calipers, however if you're able to take a couple quick measurements we can find a replacement bolts for you. For example, the Replacement Guide Bolt for Kodiak Calipers…

view full answer...

Answer 9

I spoke with my contact at Kodiak regarding the Replacement Mounting Bracket for Kodiak Disc Brake Caliper #KCMB138HRD referenced in your question. He stated that for Grade 5 bolts, you will want to torque to 85 ft lbs. For Grade 8 bolts you will…

view full answer...

Answer 10

Hi Brett, are you referring to the guide bolts? We do carry some replacement guide bolts like the #KGBS which are brand and capacity specific. If they aren't Kodiak, Dexter, or DeeMaxx then we probably don't have a replacement part that fits.…

view full answer...

Answer 11

I reached out to Reese and they do not offer that pin separately for your Reese M5 5th Wheel Trailer Hitch #RP26FR. You would have to get a new Head #RP30892 to get their exact pin setup otherwise you can use the 1/4" Safety Pin with 8"…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Availability of Replacement Caliper Bolts for Kodiak Calipers

Product Page this Question was Asked From

Continue Researching