Can E Track Heavy-Duty O-Ring Tie-Down Anchors Be Used With X-Track To Secure A Vehicle?

Question

Question:

Can this item be used with ratchet straps to secure an automobile in an enclosed car hauler that has x-tracks installed?

asked by: Jim P

0

Expert Reply:

Hello Jim, thanks for reaching out. Yes, the etrailer E Track Heavy-Duty O-Ring Tie-Down Anchor # e87HR can absolutely be used to secure a vehicle in a trailer with X-track. The O-Ring will attach to E-track or X-track. Securing vehicles is pretty typical application for these. Each one has a 2,000 lb capacity so that covers most any vehicle.

What car will you be securing? A lot of people use these to transport classic cars so just curious if you have something cool haha

expert reply by: Jesse M

0

E Track Heavy-Duty O-Ring Tie-Down Anchor
(click to enlarge)

Jim

7/9/2025

Hey Jesse, Sorry I didn’t answer sooner I forgot. Transporting a drag racer and at times a classic, so got both racing and street covered.

Jesse M.

7/10/2025

@Jim Oh cool I figured it would be a classic car! The E-track is so versatile I am sure it will work great for both cars. Come back anytime you need anything!

Answer 1

Hey Mike, thanks for reaching out. Your roof thickness is going to make this tricky. That Advent system is really built around a standard roof thickness of 2-1/2" to 5", and at roughly 6-1/4" you’re outside that range. Advent doesn’t…

view full answer...

Answer 2

No, it does not James. The etrailer Electric Trailer Jack item #e22QV includes a 7-way connector and snap pad but not cover. The plastic housing will keep water from getting inside and damaging the controls. All of the buttons are covered in a…

view full answer...

Answer 3

It sure does Steve! Our 3,500 lbs etrailer Electric Trailer Jack w/ Tongue Weight Scale item #e43KV also comes in a 5,000 lbs capacity. We have two different options depending on how you want to power it that I have listed below: Wired to Trailer -…

view full answer...

Answer 4

Welcome back Bryan! Horizontal E Track like item #e75VR in black or item #e35VR galvanized are going to be the best way to secure something heavy to the side of your utility trailer. The Horizontal E Track item #e75VR is a 3' long section that…

view full answer...

Answer 5

Thanks for reaching out Eric. The etrailer E-Track Backing Plates with Hardware #e46RR include four 1/4"-20 x 2-1/2" Grade 5 bolts per backing plate. This hardware should be plenty strong for securing the 3,800-lb vehicle you mentioned,…

view full answer...

Answer 6

Yes, the Replacement Spring Bar Retention Bracket Kit #RP58498 can be used for your Reese Pro Round Bar Weight Distribution w Sway Control #RE44FR.

view full answer...

Answer 7

The Excalibur ST-104EZSS-60C is stainless steel and the Trailer Wheel Center Cap part #425EZ is chrome.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Can E Track Heavy-Duty O-Ring Tie-Down Anchors Be Used With X-Track To Secure A Vehicle?

Product Page this Question was Asked From

Continue Researching