Are Firestone F2525 Air Bags Compatible With In-Bed Hitch on 2013 Ford F-150

Question

Question:

Hi I have a 2013 ford f150 with the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle Part Number: F2525 I was wondering if these rails will work with my helper springs. Thank you

asked by: Bowdy

0

Expert Reply:

Hi Bowdy, welcome back! I'm sorry to say that the Firestone # F2525 air bags are not compatible with the # RP50081-58. The brackets mount in the same location. Just like what Bud said before, it would be best to switch to the Air Lift for 2WD # AL88228 or 4WD # AL88200 air bags which are compatible with an in-bed hitch. This will allow you to install the base rails or a gooseneck hitch like # BWGNRK1104 if you're still interested in adding one.

expert reply by: Robin H

0

Reese Base Rails
(click to enlarge)

Robin H.

9/2/2025

Hey Bowdy, did you decide to switch to the Air Lift air bags for your Ford F150? I'd like to hear your outcome because it could give others confidence when ordering replacements.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 9

Hey Douglas, whenever available I recommend going with the HD version of the Roadactive kits like the part #RAS3611-YHD that fits your 2022 Ford F-150 4WD. The extra capacity of this kit over the non-HD basically doesn't have any downside aside…

view full answer...

Are Firestone F2525 Air Bags Compatible With In-Bed Hitch on 2013 Ford F-150

Products Featured in This Question

Continue Researching