Can You Buy Just the Replacement Spring Bar for Curt TruTrack Weight Distribution System?

Question

Question:

I lost one of my sway bars. Can I purchase a single bar? The hitch is, s05275c-ra. Thanks

asked by: Timothy M

0

Expert Reply:

Hello Timothy,

Yes, you can purchase just the spring bars.

I am not showing part number "s05275c-ra" in my system, when I do a Google search it is showing up at a replacement head for the Curt TruTrack Weight distribution system.

If you have the Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 10K GTW, 1K TW # C69JR then you will need the Replacement Spring Bar for Curt TruTrack 2P Weight Distribution System w/ Sway Control - Qty 1 # C86BR.

If that is not your system, or your system is not rated for 10K, then tell me what you do have so I can find the right rated spring bar.

What kind of trailer are you pulling that you use the weight distribution hitch for?

expert reply by: Kate F

0

Answer 1

-Hey Tom, Equal-i-zer makes frame brackets for 8 inch trailer frames. For that you would need the part #EQ90-02-5378 for outer link and then for an inner link part #EQ90-02-5208. You'd need two of these with the system you order since the…

view full answer...

Answer 2

Welcome back Don! The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37120ET is exactly what I would recommend using. This is a solid reliable system and the built in sway control will make a noticeable improvement in ride…

view full answer...

Answer 3

Hi Garrett! We do have options for your 2015 Kenworth T270, but there are not going to be any custom fit hitches available. If I were doing this, I would go with the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2" Receiver - 44"…

view full answer...

Answer 4

Hey Charles! The Curt TruTrack 2P Trunnion Weight Distribution System w/ Sway Control - 7-Hole Shank - 12K GTW #C75RJ will work great with your 2026 F-250 to pull a 25-30 ft RV. There isn't a kit with a 2.5" shank, but you can add Curt…

view full answer...

Answer 5

Weight distribution systems that have 2-point sway control generally have sway control just at the ends of the springs bars on the trailer side. On the Fastway systems for example the L bracket that secures the bar to the frame bracket can be…

view full answer...

Answer 6

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 7

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Can You Buy Just the Replacement Spring Bar for Curt TruTrack Weight Distribution System?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching