What Is The Correct Tube Dimension On The Dexter DX32CR?

Question

Question:

Can you confrim outsides dimension on hydraulic jack Part Number: DX32CR site says 4x4 but I see 5x5 on other sites Thank you Tony

asked by: Tony B

0

Expert Reply:

Hey Tony,

The Dexter Single Hydraulic Jack, # DX32CR, is a 4" x 4" outer tube hydraulic jack, 12,000lb capacity. I am not sure what other sites are saying but I confirmed with Dexter that it is a 4" x 4" outer tube.

What trailer are you looking to put this on.

expert reply by: Nick S

0

Nick S.

9/2/2025

Hey Tony, did you find the right fit for your trailer with the 4 x 4 hydraulic jack? I'm asking to ensure we provide the best guidance to others with similar questions.

Answer 1

Hey Winston, the Dexter Single Jack Add On part #DX32CR doesn't come with a mounting bracket or mounting hardware as it was designed to be welded on.

view full answer...

Answer 2

Hello Josh. Yes, the Dexter Self-Contained Hydraulic Jack #DX72CR can indeed be welded on. It is intended to be bolted on, but the instructions also cover weld on applications as well.

view full answer...

Answer 3

Hi Nick; the Dexter Self-Contained Hydraulic Jack #DX72CR can be bolted onto your dump trailer. The only other thing you will need is a 12V battery to power the jack. This has a lift capacity of 10,000 lbs, a support capacity of 12,000 lbs, and comes…

view full answer...

Answer 4

Thank you for the pictures! I reached out to my contact at Dexter Axle who was able to confirm that you have #11 Torflex axles so the correct lift kit is part #K71-724-02. Since yours has top mounting holes you also need the bracket kit #DX57FR for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

What Is The Correct Tube Dimension On The Dexter DX32CR?

Product Page this Question was Asked From

Continue Researching