Availability Of 205/75-14 Spare Tire For Trailer With 4-Lug 14" Wheels

Question

Question:

Need spare for trailer. 4 lug 14! Tires size on trailer is 205/75/14. Thanks.

asked by: Kenneth B

0

Expert Reply:

Hello Ken, thanks for reaching out. A 4-lug 14" wheel is not common. We do have the 205/75-14 tires, but our largest 4-lug wheel would be a 13". We do not have a 4-lug 14" wheel, they are all 5 on 4-1/2".

So I can provide a spare tire for you such as part # KE88KV, but sadly we do not have a wheel for you.

expert reply by: Jesse M

0

Karrier ST205/75R14 Radial Trailer Tire - Load Range C
(click to enlarge)

Jesse M.

9/8/2025

Hey Ken, did the spare tire option work out for your trailer? I'm asking because it could help others who are looking for similar solutions.

Kenneth B.

9/8/2025

Satisfied with tire. Did not like the automatic extra fees that were added on and were tough to refuse on the website such as road hazard, disposal, etc. The rim,I found out, was an old Ford Falcon/Fairlaine rim which were all 4 hole 14". All is well; I welded a 4 hole hub on the trailer and mounted the rim and tire as a spare.

Answer 1

Hello Bob, thanks for reaching out. You've probably never heard of it because the Strider of tires are a new line made by Taskmaster, which is a brand you may have heard of. Basically, the Strider tires are designed for smoother ride quality. So…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hello Steve, thanks for reaching out. All of the trailer tires we sell come balanced in the manner that trailer tires are balanced. Every tire and every wheel has a high (heavy) and low (light) spot. The manufacturers offset the high spot on the tire…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

view full answer...

Answer 12

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Availability Of 205/75-14 Spare Tire For Trailer With 4-Lug 14" Wheels

Product Page this Question was Asked From

Continue Researching