What Size Bleeder Screw Does Demco Replacement Brake Caliper # DM13825-92 Have

Question

Question:

Bleeder Screw or blanks for demco DM13825-92 or can you tell me thead kind as we used then on rentel trailer in austrailia

asked by: Gordon S

0

Expert Reply:

Hey Gordon, the bleed screw threads on the Replacement Brake Caliper Assembly for Demco Tow Dollies # DM13825-92 is 1/4"-28 but we don't offer it as a replacement part at this time.

expert reply by: Jameson C

0

Jameson C.

9/12/2025

Hey Gordon, did you find a suitable replacement for the bleed screw on your rental trailer in Australia? I'm asking because it could help others facing a similar situation.

Answer 1

Thanks for reaching out! The replacement brake pads for your Demco Kar Kaddy SS #DM9713045 can be found as part #DM59VR on our site. This includes parts for both sides of the tow dolly. If you want to replace the whole assembly then you can do so by…

view full answer...

Answer 2

The Replacement Wheel for Demco Kar Kaddy 3 Tow Dolly - White #DM09296 will fit the measurements you gave as the older style had significantly different measurements. I reached out to my contact at Demco to confirm this wheel fit with the dimensions…

view full answer...

Answer 3

Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional…

view full answer...

Answer 4

Hey Goose, thanks for reaching out! I sent your specs over to my contact at Dexter Axle who said your bearings are both L44649 which means you need the Bearing Kit #BK1-150 for both axles. Is there anything else you're needing to replace/upgrade?…

view full answer...

Answer 5

To find the correct hubs for your Demco trailer you will need to verify a few things first, otherwise you'll most likely end up ordering a part that won't work. Trailer couplers are a bit more universal than a hub so it's important to get…

view full answer...

Answer 6

The bleed screw threads on the Replacement Brake Caliper Assembly for Demco Tow Dollies #DM13825-92 is 1/4"-28.

view full answer...

Answer 7

Thank you for reaching out! Yes, the Replacement 10" Brake Rotor #DM03927-92 will fit your trailer and then for a brake caliper you need the Brake Caliper Assembly #DM13825-92. When I confirmed this with my contact at Demco he informed me that…

view full answer...

Answer 8

Michael, to add brakes to your Demco Kar Kaddy 3, you can use the Kodiak Disc Brake Kit #K2R35D. This will allow you to slide the rotor over the existing idler hub, and the brackets for the caliper will bolt to the brake mounting flange. You will…

view full answer...

Answer 9

You guessed right, because the Replacement Hub Assembly for Demco Kar Kaddy, Tow IT II, or Penske Tow Dolly #DM04369 uses 7/16” - 20 bolts. I've added a link to a video review of this hub assembly for you to check out as well.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Size Bleeder Screw Does Demco Replacement Brake Caliper # DM13825-92 Have

Product Page this Question was Asked From

Continue Researching