How to Tighten Fastway Ball Mount Hitch Balls

Question

Question:

I have an aluminum fastway hitch that the balls have become loose in the fixture. Is there a way to tighten them back up?

asked by: Steve J

0

Expert Reply:

Hi Steve; there should be an adjustment bolt on the ball platform that looks like the picture below. You will need a 5/16" Allen wrench to tighten it up and secure the hitch balls.

expert reply by: Robin H

0

Replacement Main Adjustment Bolt for Fastway Ball Mount
(click to enlarge)

Robin H.

9/12/2025

Hey Steve, did tightening the adjustment bolt with the Allen wrench fix the issue with your hitch balls? I'm asking because your experience could really help others with similar problems.

Steve J.

9/13/2025

@RobinHi can’t find the adjustment bolt on my hitch. Do I have to remove anything?

Robin H.

9/14/2025

@SteveJ you have to remove the balls from the shank and it will be on the back.

Steve J.

9/21/2025

@RobinHdo you happen to have a photo of video? When I take mine off the receiver there is no hole or plug that I can see. I have a DT hitch fyi. Any help would be greatly appreciated!

See All (4) Replies to Robin H. ∨

Answer 1

If one of the hitch pins you have now has a usable pin length of at least 3-7/8" then you can use it on the adjustment portion of the Flash E Series Adjustable 2-Ball Mount w Chrome Balls part #FA42-00-2600. If not then you would want to use the…

view full answer...

Answer 2

Hey Michael, congrats on the new truck. The Ford puck systems haven't changed since they came out in the 2010-2011 model year trucks. The Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches item #C60629 you were…

view full answer...

Answer 3

The center hole to center hole distance between the hitch pin hole of the Fastway #FA49-00-5600 adjustable ball mount and the holes that the ball platform mounts to is 5-1/8 inches. The distance between the center of the trailer ball and the holes…

view full answer...

Answer 4

I do have a solution for you, however when I spoke with my contact at Lippert they said that your axle is rated for 5,200 lbs and the highest rated standard axles that we have are rated for 3,500 lbs. The alternative solution that we have is the…

view full answer...

Answer 5

Your Jayco 27BH has a dry weight of 6015 pounds, 1485 pounds of cargo capacity, for a maximum total weight of 7500 pounds. Tongue weight should be between 750 to 1125 pounds. I think the best weight distribution hitch for your rig is the Equal-I-Zer…

view full answer...

Answer 6

In order to actuate the trailer brakes, you'd need a brake controller installed in the vehicle and a 6 or 7-way trailer connector. A 4 pole flat wiring harness like the #18002 you'd looked at carries 4 circuits- right turn/brake lamp, left…

view full answer...

Answer 7

Hey Karl, so a totally waterproof tonneau cover is basically a unicorn. I wish we had something we knew "covered that" but none of them can keep all water out if the rain is really coming down like what you'd be experiencing in Tampa.…

view full answer...

Answer 8

Thanks for reaching out Mike! I spoke to Weigh Safe and only their Cerakote aluminum ball mounts are made in the USA. All other steel and aluminum ball mounts, including the steel 180 PRO models, are manufactured overseas. If you wanted an American…

view full answer...

Answer 9

Hey Mike, most of the Bulletproof hitches like the part #BPH77MR are made in the USA but some of the production has recently moved to China. This weighs 19.5 lbs. Then for a lock set we have the part #BPH34FR.

view full answer...

Answer 10

The Curt #C45900 adjustable ball mount features a shank that's constructed of 2 inch square steel bar stock, that's fully gusseted and welded to the channel mount, just like what you show in the photo you provided. If you'd prefer…

view full answer...

Answer 11

I have a solution for you but we do not have any extended length fixed ball mounts for 2-1/2" hitches. They're all pretty standard length. We do have an adjustable ball mount for a 2-1/2" hitch that has a distance of 16" from the…

view full answer...

Answer 12

I reached out to the manufacturer who said the hitch balls on the Flash Solid Steel Adjustable Ball Mounts are a solid piece that has a bolt running through it inside the mount. What this means is that there is zero chance of it coming apart while…

view full answer...

How to Tighten Fastway Ball Mount Hitch Balls

Product Page this Question was Asked From

Continue Researching