Looking For Replacement Brakes For Pace Trailer With 3,500 lb Axles
Updated 09/12/2025 | Published 05/21/2025
Question:
Hello so I have a trailer that says on the tags...its a pace trailer.. Gvwr 7000 3500 each axle 15x5 J rims 7x14 trailer 205/75r15 tires What brakes do I need...I want o replace all 4 Thank you
asked by: Richard R
Expert Reply:
Hello Rich, thanks for reaching out. The 3,500 lb axles use a standard brake size, which are the 10" x 2-1/4" brake shoes. For that I recommend the etrailer Electric Trailer Brakes # AKEBRK-35-SA. These are self-adjusting brakes. They use a 4-bolt brake flange which is standard, but please check your trailer and verify your brakes are also a 4-bolt flange. Some older trailers uses a 5-bolt flange so we want to be sure you don't have that. As long as your flange is a 4-bolt, you can be sure the # AKEBRK-35-SA will work for you. They are sold as a pair.
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Information Needed to Find Correct Disc Brake Kit for Tandem Axle EZ Loader Trailer
- Q&A: Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: What to Know About the Grease Seal
- Video: All About the Grease Seal
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Brakes
Jesse M.
9/12/2025
Hey Rich, did you have a chance to check if your trailer has a 4-bolt brake flange? I'm here to help if you need any more assistance with replacing your brakes.