Will DM5432 And DM5433 Fit My 2012 Demco Tow Dolly?

Question

Question:

Advise if the winch assembly 5432 and 5433 will fit my 2012 Demco total Dolly https://www.etrailer.com/Accessories-and-Parts/Demco/DM5432.ht

asked by: Pete R

0

Expert Reply:

Hey Pete,

The # DM5432 and # DM5433 will fit any Demco Kar Kaddy 3 tow dolly. If your 2012 tow dolly is a Kar Kaddy 3 these will be a direct replacement for you.

What model is your 2012 dolly?

expert reply by: Nick S

0

Pete R.

5/29/2025

Nick I may not have been clear. My question is whether or not these units would fit the 2012 Demco SS tow dolly. I did call and get verbal confirmation that they will fit but would like it to be confirmed. Many thanks Pete Rhoten

Pete R.

5/29/2025

Nick This may be a duplicate but I can't confirm my previous message was sent. I wanted to confirm that these assemblies will fit my 2012 Demco SS tow dolly. I did call and got a verbal confirmation but I'd like to get it in writing also. Many thanks

Nick S.

5/29/2025

@PeteR I must have missed that originally, oops! Both the left side # DM5432 and right side # DM5433 are going to work for your Demco SS tow dolly. My apologies for that miscommunication, but you will be all set with both sides and they will work great with your tow dolly. Do you need the loading winch as well or just the sides?

Answer 1

Yes, the Replacement Right Side Ratchet Winch for Demco Kar Kaddy #DM5433 will fit the Demco Kar Kaddy X Tow Dolly #DM9713093. I was able to verify this using the owners manual. The correct left side winch replacement is the Replacement Left Side…

view full answer...

Answer 2

It looks like you have a Roadmaster tow dolly. If that's the case, the ratchet itself is part #RM-2110 and the ratchet mounting bracket is the part #RM-2000-31 that you'd looked at. The bracket and ratchet will fit either the driver or…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

They come in separate parts as opposed to a single kit, but we do indeed have brakes for your Demco Kar Kaddy SS tow dolly, with the following parts: - Replacement 10" Brake Rotor #DM03927-92 - Replacement Brake Caliper Assembly #DM13825-92 -…

view full answer...

Answer 8

Thanks for the pictures! We do have a different style ratchet option for your older tow dolly but you will need to measure the size of the bracket on your current ratchet. The most likely option we have is the Replacement Left Side Ratchet Winch…

view full answer...

Answer 9

Yes, the Replacement Left Side Ratchet Winch #DM5432 that you referenced is also the correct replacement part for your Demco Kar Kaddy SS model Tow Dolly. If you need the right side assembly as well you will use part #DM5433.

view full answer...

Answer 10

The yellow wire of the 7-way harness part #H20044 that you referenced goes to the center pin of the 7-way which is an aux circuit that is typically used for reverse lights if present on the trailer. Normally the red wire on a 7-way (RV standard…

view full answer...

Answer 11

Most likely the yellow wire on your trailer is what carries the reverse or auxiliary power circuit and would be connected to the center pin of the 7-Way like #PK12706. This would line up with standard 7-Way wiring for a 5th wheel or travel trailer. I…

view full answer...

Answer 12

If the steering stabilizer shock on your Demco Kar Kaddy SS Tow Dolly part #DM9713045 has gone bad then the wheels on the tow dolly may shimmy a bit while driving down the road or you will see oil around where the shock mounts as this would point to…

view full answer...

Will DM5432 And DM5433 Fit My 2012 Demco Tow Dolly?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching