Does EcoHitch # 306-X7904 Fit 2019 Ford F-350 Diesel

Question

Question:

My truck is a 2019 F350 super duty SRW 6.7 diesel super crew. I am interested in the front mount eco hitch but is says it s not compatible with oil cooler. How do I know if i even have this cooler? Is there a way to relocate this cooler to accommodate the eco hitch? Thanks

asked by: Les B

0

Expert Reply:

Hey Les, at one point we thought the EcoHitch part # 306-X7904 didn't fit the diesel models of the 2019 Ford F-350 Super Duty but we've recently learned that it does and the intercooler you mentioned is not an issue.

expert reply by: Jameson C

0

Jameson C.

9/26/2025

Hey Les, did the EcoHitch work out for your truck without any issues with the intercooler? I'm curious to know because it could help others with similar setups.

Answer 1

Hey Joseph, this is a great question but yes the EcoHitch front hitch part #306-X7904 does fit the diesel model and yes the diesel models are the ones that have the front cooler which is actually the intercooler. The tech tip you found is incorrect…

view full answer...

Answer 2

I checked with Torklift and the EcoHitch Hidden Front Mount Trailer Hitch Receiver part #306-X7904 is a fit for both gas and diesel models of a 2020 Ford F-350.

view full answer...

Answer 3

I took a look at the owner's manual for a 2017 Ford F-350 for you and found the following under "Wiring Fault on Trailer" "Displays when there is a short circuit on the electric brake output wire. If this message displays, with no…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

view full answer...

Answer 11

Hey Steve, we have the EcoHitch front hitch part #EH54QR as a confirmed fit for your 2025 Ford F-350 dually.

view full answer...

Answer 12

Thanks for reaching out Kevin, happy to help! I checked the specs for the 2025 Brinkley Z3100 and it has 7,000 lb tandem axles and 17.5" wheels. The DeeMaxx Disc Brake Kit w/ Actuator #DE57NR is designed for tandem 7,000 lb axles with an 8 on…

view full answer...

Does EcoHitch # 306-X7904 Fit 2019 Ford F-350 Diesel

Product Page this Question was Asked From

Continue Researching