Is Curve of Trailer Axle Through Entire Axle Tube
Updated 09/26/2025 | Published 04/26/2025
Question:
Regarding the camber/pre-bend in the middle of the axle tube: How many inches length of the tube is affected by the pre-bend? In other words, the axle ribe is straight but for X inches in the center. Thanks!
asked by: Trailer D
0
Expert Reply:
Hey Trailer Dude! The curve in a trailer axle like the part # 8327820-EB is basically all the way through the axle tube. There isn't just a curve in the middle and the sides are totally flat.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Recommended Axle To Replace Older AL-KO 4400lb Axle # 402268
- Q&A: Are There Exact Hanger Spacings to Use with Terran Slipper Spring Hanger Kit # TX85VJ
- Article: Spring Towing Readiness Checklist
- Q&A: Does The Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire Come Balanced?
- Q&A: Can You Balance The Tires Before Shipping Them
- Q&A: Grease Seal that Fits Dexter 5,100 lb Trailer Axle
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Replacement Axle For Dexter Axle With 68.5 inch Spring Center Length
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Maintenance Schedule
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: How to Raise Your Travel Trailer Height
Jameson C.
9/26/2025
Hey, did the explanation about the trailer axle curve help with what you were trying to figure out? I'm curious to know how it worked out for you, as it could give others confidence when dealing with similar axle questions.