Result: dust cap installation tool

The correct grease cap for the Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles #DX46XR is the #TRU66FR.

The Advent Air Low Profile RV Air Conditioner #ADV56FR included with the Advent Air Low Profile RV AC Package #ASA78YR does not list specific starting and running watts. I was able to find information in a flyer for this AC that it has a rated…

From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…

Load range capacity varies based on the tire size and brand, so without knowing either, it's hard to say. For example, a load range D tire in size 145/80-12 has an average capacity of 1,220 lbs, while a load range C tire in size 185/80-13 has an…

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

The fact your outer bearing fits on a .75 diameter spindle means we aren't going to have a standard bearing kit to fit since that's not a standard dimension. Can you get me the C dimension as well? It could be that you need the part #LM67048…

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

The Pintle Hook #C48215 that you referenced does include mounting hardware to attach to a pintle hook plate like the Super Titan Forged Pintle Hook Plate #RP38186 that you referenced. I also pulled these two parts and was able to determine that they…

The load range has to do with the horizontal and sidewall strength of a trailer tire. The C range tires are 6 ply and the D range tires are 8 ply. Because you are operating at half of the spring capacity of your trailer, bumping to a higher load…

Yes, you can replace your load range C tires with load range D tires without issue. It will only become any issue when you go down load ranges, not up. The tires will have the same overall diameter as long as they are the same size regardless of…

From my research, the correct replacement for the UFP HD1377 hub/drum is the Trailer Hub and Drum Assembly part #AKHD-545-35-K or the Dexter 5 on 4-1/2 Complete Hub-and-Drum Assembly part #84546UC3. These hub/drums both use a L68149 (1.378"…