Availability of Happijac Camper Tie Downs for 2019 GMC Sierra 3500 Short Bed

Question

Question:

Truck camper tie down. Happijac or similar for 2019 GMC 3500hd crew cab running boards to rear door 6 1/2 bed

asked by: Tim D

0

Expert Reply:

Hey Tim, we do have a set of Happijac camper tie downs that fit your 2019 GMC Sierra 3500 with the part # LC350763-182971. Do you need turnbuckles too?

expert reply by: Jameson C

0

Tim

4/3/2025

yes

Jameson C.

4/3/2025

@Tim The Qwik Load part # LC182895 would be a great option that are easy to use and are very secure.

Answer 1

Hey Jacob, thanks for the information! I have three options for frame mounted camper tie downs that will fit your 2015 Chevy Silverado 2500HD with an 8' bed and full length running boards. Which set you need is going to depend on what kind of…

view full answer...

Answer 2

Hello Gary, thanks for reaching out. I can definitely make sure you get the right tie downs for your truck. I will need to know a bit more about your truck before we move on. First, is your truck single rear wheel or a dually? Second, do you have any…

view full answer...

Answer 3

Hey Chris, Happijac's fitment for Chevy/GMC trucks only goes up to 2015 so there is not an option compatible with your 2024 model year. The only option currently available is from TorkLift with the #TL67DR (SRW) or #TL94PR (DRW) like we talked…

view full answer...

Answer 4

While we offer camper tie-downs that fit a 2022 Chevy Silverado 2500 HD, I checked with the manufacturer, and the Happijac tie-downs do not fit your truck. So instead what you will need are TorkLift camper tie-downs, and please note there are…

view full answer...

Answer 5

What is your bed length? What hitch do you have at rear of truck? Do you have running boards?

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Availability of Happijac Camper Tie Downs for 2019 GMC Sierra 3500 Short Bed

Product Page this Question was Asked From

Continue Researching