To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These camper tie-downs use HappiJac’s Direct-to-Frame design to keep your setup stable on long trips and rough roads. By securing your camper to the truck’s frame instead of the bed rails, the system distributes weight evenly and prevents side-to-side or front-to-back movement. That means a safer, more balanced ride with less sway—especially when traveling with heavier campers.
When you’re not hauling, the tie-downs all but disappear. The front anchor plates stay tucked between the cab and bed, while the rear anchors remove quickly with a quarter-turn for a clean finish. You won’t have bulky brackets sticking out or catching your leg when walking around the truck.
Every component is made from strong steel for a solid, confident hold. The front tie-downs are powder coated and the rear anchors are chrome plated to resist rust and corrosion. Whether you drive through winter salt or summer rain, these finishes help keep everything looking good and performing like new.
Each tie-down includes centering guide locks with rollers that help align your camper during loading while keeping it from shifting once mounted. You can also add an I-beam stabilizing bar (sold separately) between the front brackets for even more rigidity. Together, these features create a truss-like structure that keeps your camper locked in place across all four corners.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the HappiJac custom tie-downs for truck bed campers. Now this is going to be for the 2014 through 2018 GMC Sierra trucks and also the Chevy Silverado trucks. To be sure that this is going to be a specific fit for your particular truck, it's a good idea to go through our fit guide here at etrailer.com, put in your year, make and model and then go from there. So basically this is going to give us a secure anchor point for our turnbuckles to hold down our in bed camper.
So these are going to mount to the bulkhead of your truck bed, so that front part right behind your tab. And it does need to work in conjunction with a stabilizing bar for the HappiJac custom fit jacks.Now that can be purchased separately, you can also get a kit with these both together. That's also available here at etrailer.com if you want to get them together, or you can reuse that stabilizer bar if you already have the system. These will mount there, and then these sort of L-shape brackets will mount to that. The black brackets will be mounted to the front of the bulkhead, so these are going to kind of be sticking out between our cab and our bed, and this will be our front anchor point.
So these kind of sandwich together against the bulkheads sort of like that. So our truck bed will be in between, and then we'll have these two brackets. That will be our front attachment point. At the rear we'll have these brackets to go on our bumper. So the screw will go and place a secure semi flat spot on your bumper, and then you can attach the little angled bracket there, and that'll be our attachment point for our turn buckles at the back.So it comes with everything you need to get that installed.
It's going to be a really secure system. Everything's going to be frame-mounted, so it's going to engage really strongly and securely. We also get all the hardware. Each kit is labelled, so we'll have kit A, B, C, D, and E and then also these spacers to get everything mounted up properly. So this is going to be a very sturdy construction to hold your camper tightly inside your truck bed, so you don't have to worry about any side-to-side sway or any front-to-back movement.
These two brackets are going to be mounted at the front, and these are basically just going to be your guide plates and guide brackets. And these are not going to center your camper, but once it's centered in there, these help it to stay centered.So they're kind of just like little bumpers to take up any kind of gap there, so there's no shifting side-to-side or front-to-back. So it helps everything stay nice and secure. You don't have to feel like your camper's kind of wiggling around or any kind of movement in your truck bed. Again, that stabilizing bar is sold separately here at etrailer.com. That part number is LC182971 and you can find that right here at etrailer.com. You can also find the actual turnbuckles, either just the standard stainless steel style or you can also get the quick load, which are a little bit easier to use. Either one of those are also available here, and you can find those in the related products parts on our product page here at etrailer.com. That's going to do it for our look at the HappiJacs custom tie-downs for truck bed camper..
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.