Can I Use Threadlocker When Installing Dexter Electric Trailer Brakes?
Updated 10/27/2025 | Published 03/23/2025
Products Featured in This Question
Question:
I recently purchased and received from Etrailer, a set of new Dexter Hubs and drums for my 4.000 lbs. axle travel trailer and I am getting ready to install them. Since I cannot fit my torque wrench onto the mounting bolts due to the bolts close proximity to the axle, should I tighten the bolts as much as I can by hand and then use the blue thread sealant on the brake plate bolts when attaching it to the axle plate?
asked by: Don C
Expert Reply:
Hey Don welcome back! I wouldn't go that route with treadlocker like item # LT37614 to install the Dexter Electric Trailer Brakes item # K23-462-463-00 you purchased. I recommend purchasing a socket extension so you get the bolts torqued on to the required specs.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: bearing kit
- Shop: Replacement Trailer Axle Spindle Retainer Kit for Dexter Axles Manufactered After June 2002
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: etrailer Electric Trailer Brakes Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Search Results: trailer brakes
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle, Bearings L44649/L68149
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle - Bearings L44643/L44643, Races L44610/L44610
- Shop: Replacement Nut Retainer for 6-191 Jam Nut
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Q&A: Recommended Torque Value For Installing Brake Assembly to 3500# Axle
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Search Results: dexter grease
- Q&A: What Size Trailer Rim Should be Used for a 205/75-15 Trailer Tire
- Q&A: Lippert Trailer Shock Kit for Single Axle Casita Travel Trailer
- Search Results: hub with drum trailer hubs and drums
- Search Results: l44649 bearing
- Search Results: trailer hubs and drums
- Search Results: dexter 69 47 axle
- Video: etrailer Electric Trailer Brakes Comparison - Self Adjusting VS Manual
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
on Trailer Brakes
Jerred H.
10/27/2025
Hey Don, how did things go once you used the socket extension to torque the brake plate bolts on your trailer? Your update could make it easier for the next person working with Dexter hubs and brakes in a tight space.