Air Bag Kit Recommendation for 2021 Ford F-150 with B and W Turnoverball Gooseneck

Question

Question:

I have a 2021 f150 with the hybrid ecoboost, Ive installed the BandW turnover ball and now would like to add airbags. My truck is 4x4 as well. Are there airbags compatible with my truck if it has the goosneck hitch?

asked by: Travis S

0

Expert Reply:

Hey Travis, we have the Air Lift LoadLifter 5000 kit part # AL47PD that is a confirmed fit for your 2021 Ford F-150 and also is compatible with in-bed hitches like your B and W Turnoverball Gooseneck part # BW77FR. What are you towing?

expert reply by: Jameson C

0

Jameson C.

10/27/2025

Hey Travis, how did the Air Lift LoadLifter 5000 kit work out with your F-150 and B&W Turnoverball setup? Your results could help others trying to pair airbags with a gooseneck hitch.

Travis S.

10/27/2025

@JamesonC. They did with modification, I had to weld the brackets in place because they are not compatible with the bw turnover ball hitch as I was told they were.

Jameson C.

10/27/2025

@TravisS oh man! I'm glad you got it to work but sorry it wasn't as simple as it should have been. Air Lift had told us it does fit with in-bed hitches like what you have without any exclusions for the B and W Turnoverball.

Answer 1

Thanks for reaching out, Steve! Both Air Lift LoadLifter 5000 kits, parts #AL47PD and #AL82WQ, fit a 2021 Ford F-150 4WD. The only difference is whether your truck has the CCD (Continuously Controlled Dampening)/Onboard Scales, or the PowerBoost…

view full answer...

Answer 2

I do have an option for you but the Firestone Ride-Rite Air Helper Springs part #F2582 are indeed incompatible with a 2021 Ford F-150 PowerBoost due to additional brackets on the frame where the air bags mount. Instead, you will need to use the Air…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Air Bag Kit Recommendation for 2021 Ford F-150 with B and W Turnoverball Gooseneck

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching