Do Other Brand Roof Racks Fit Yakima Topper Channels

Question

Question:

I have a ARE cap with factory installed rials for yakima roof rack feet, what other toers and craccbars will fit this bars

asked by: Loyd

0

Expert Reply:

Hey Loyd, nearly all roof rack setups for top channels will fit the Yakima channels you have on your cap. Rhino Rack has complete kits for this that include their HD crossbars with the part # Y01-140B-NT which comes with 65 inch long crossbars.

expert reply by: Jameson C

0

Loyd B.

3/5/2025

THANKS Jameson< One other question are the shorter cross bars Like 60 inches that will work for the Rhino rack towers or can these be cut down. Im going to order the rhino rack regardless! I have oreder many times for etrailer and have always been satisfied the products Loyd

Jameson C.

3/5/2025

@LoydB Glad to help! So we have this with a 54 inch long crossbar instead with the part # Y01-120B-NT or if you wanted to cut down the bars to 60 inch that's totally fine too.

Answer 1

Thule roof racks can be installed in Yakima tracks like what you have. You'd need the fit kit part #THKIT3101 and the Podium feet like part #TH460R and the crossbars #TH711120 and you'd be set.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Rick! The B&W pin box adapter is a great choice to upgrade your trailer setup to tow with your diesel 2026 Chevy Silverado 2500 HD with 6-1/2' bed! I gave your specs to the manufacturer and confirmed that you have a Lippert Rhino pin box.…

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 10

Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…

view full answer...

Answer 11

Thanks for the information Gil! The best ball mount options for your 2022 Ford F-350 duallys 3" factory hitch are the B&W Tow & Stow 2-Ball Mount item #BWTS30040B or the Tow & Stow 3-Ball Mount item #BWTS30049B. These ball mounts…

view full answer...

Answer 12

Hey Don, sorry to hear that you are still experiencing sway even with your Andersen WD system. There's a couple things to check first though. Make sure you have as much weight forward in your trailer as possible as not enough tongue weight…

view full answer...

Do Other Brand Roof Racks Fit Yakima Topper Channels

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching