Is The Spring For A 7-Way Connector Door Replaceable

Question

Question:

Hello, The 7-Way Adapter spring broke so the little door is loose on my C class motorhome for the toad. Is it possible to replace spring or do I need a whole new 7-way adapter? Please inform, Robert Welsh

asked by: Robert W

0

Expert Reply:

Hi Robert,

The spring isn't going to be replaceable so the whole connector would need to be replaced. Depending on what style you have you'll need a specific replacement. Would you be able to send me some pictures of the 7-way from the front and from the back so I can see what style you have?

expert reply by: Kevin C

0

Jerred H.

10/30/2025

Hey Robert, did you get a chance to check which style of 7-way connector you have for your motorhome? Once you know that, I can help narrow down the right replacement. Let me know what you find so we can get you set up again.

Answer 1

The Sumo Springs for the 2014 Ford F-53 chassis only fit the 16K to 22K chassis models but I do have an excellent option for you. Since your chassis is rated for 24K you can use Air Lift air bags, #AL88344, for the rear and #TFFF53B for the front.…

view full answer...

Answer 2

I checked with SuperSprings and the SumoSprings Rebel Custom Helper Springs part #SSF-170-40-2 are a fit for the front of a 2020 Forest River FR3 Motorhome as they are designed for a 16,000 lb to 22,000 lb GVWR which your 18,000 lb GVWR falls…

view full answer...

Answer 3

Hey Ivey, it sounds like you are looking for the Curt part #C35FR. This plugs into a 7-way which you should have at the rear of your 2025 Ram 1500 to give you a 4-way that has the resistors built in to allow the bulb out sensor issue to go away. You…

view full answer...

Answer 4

Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which is a part number for a 10 pack. It looks like Optronics is phasing out the STL87 smoke series as well so I can't get them.…

view full answer...

Answer 5

Hey Ben! The Curt does have that restriction on the vertical bike racks so I recommend the TowSmart Trailer Hitch #TS82VR. This has a higher tongue weight capacity and will allow you to carry the VelociRAX. It would be a good idea to add the etrailer…

view full answer...

Answer 6

It absolute is Clinton! Installing the Timbren Axle-Less Trailer Suspension System item #T54KV is going to be pretty easy for someone who's got experience working on their vehicles or trailers. The most complicated part is going to be getting the…

view full answer...

Answer 7

Hey Linda! To add a 7-way to your 2019 Chevy Blazer you need the Curt T-Connector Vehicle Wiring Harness #C56326. This will replace your existing 4-way using the factory connections on your vehicle. Then for a brake controller, I recommend the Redarc…

view full answer...

Answer 8

The replacement I recommend for an Atwood Surge Brake Actuator 85778 is the Demco Hydraulic Brake Actuator part #DM62VR. It has the same ball size, offers a bolt-on install, and has a greater capacity. The only difference is it has an electric…

view full answer...

Answer 9

The issue you are having is that the 5th circuit of a 5-way is not normally wired for a brake output circuit so if your adapter is not able to connect the correct circuits since it's assuming the 5th circuit is for reverse lights. The easy fix…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Is The Spring For A 7-Way Connector Door Replaceable

Product Page this Question was Asked From

Continue Researching