What Suspension Components Typically Get Replaced with Leaf Springs on Trailer Suspension
Updated 02/03/2025 | Published 01/30/2025
Question:
I have a travel trailer that the leaf springs are starting to wear out in. I have double eye leaf springs with a suspension kit like https://www.etrailer.com/Trailer-Suspension-Parts/etrailer/e99ZR.html. This is stock presently, not after market. I need to raise the trailer this weekend and unload the leaf springs to I can get some accurate measurements for new springs and leaf spring mounting hardware. My question is in your professional opinions, what other hardware should I replace when doing leaf springs u-bolts and plates and hardware, shackle straps and hardware? I assume right now that there is no reason to replace the actual equalizer and the hardware that mounts it to the frame. Thank you.
asked by: William D
Expert Reply:
Great question William, basically it just comes down to the condition of everything. You can sometimes get away with just replacing the springs but you'd want to check out all of the moving components and see what is good and what isn't. It could be you just need new spring bolts but you also might need shackles as well. If you are out there measuring the spring with a load off of it just go over all of the components and it'll be pretty obvious.
Product Page this Question was Asked From
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Search Results: axle spindle nut
- Search Results: shackle strap
- Search Results: tow shackles accessories and parts
- Search Results: shackle
- Search Results: trailer leaf springs
- Search Results: 3500 lbs trailer leaf springs
- Search Results: galvanized shackle
- Shop: Lippert Trailer Suspension Shoulder Bolt - 9/16" x 2-5/16" - Qty 4
- Video: Review of Redline Dust Cap Driver Tool - 290-992
- Q&A: Recommended 26" Long 4-Leaf Double Eye Leaf Spring for a 4,000 lbs Axle on a Boat Trailer
- Shop: Lippert Spindle Nut Kit w/ Round Washer - For 2,200-lb to 4,400-lb Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: Looking for Rust Resistant Replacement Leaf Spring, U-bolt Kit, and Hub for 3,500 lb Trailer Axle
- Shop: Lippert Spindle Nut Kit w/ Round Washer - For 10,000-lb Axles
- Q&A: Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Video: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown
- Video: Let’s Check Out the Washer For 1" Spindle
- Video: An In-Depth Look at the Replacement Shackle Strap
- Video: Replacement Shackle Strap Feature Review
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Shop: Washer For 1" Spindle
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: Trailer Spindle Nut 1"
- Q&A: U-Bolt Kit For Double-Eye Leaf Spring e48SR
- Q&A: Can You Convert an EZ Lube Spindle To The Dexter Style Retainer System K71-622-0?
- Q&A: Do My Leaf Springs Need To Be Replaced And What Are My Options?
on Trailer Suspension Parts
William D.
1/31/2025
I will check back after I lift the rig this weekend and do an inspection, thank you very much.