Looking For Replacement Leaf Springs For Single Axle Trailer
Updated 09/12/2025 | Published 05/24/2025 >
Products Featured in This Question
Question:
Hey there! Trying to figure out which size leaf springs to get for our trailer and which pieces we need. The bolts are 26 1/4” apart, do the leaf springs need to be that exact size? This is a single axle flat trailer. The part where the springs connect to the axle I’m also curious about. We have a square axle running across, what part would be need to attach to that? Thank you!
asked by: Richard B
Expert Reply:
Hello Richard, thanks for reaching out. Yes, the replacement leaf springs must be the same size as the current springs. There is a small amount of wiggle room like 1/2" or so with the single axle suspension, but we want to get the spring size as close as we can. The best practice is to jack up one side of the trailer so you can measure the springs unloaded.
Aside from the unloaded spring measurement, I will also need to know the weight capacity of your axle. This way we can be sure the spring is appropriately rated.
For example, the 4-Leaf Double-Eye Spring # e22YR is 26" long and is rated for a 4,000 lb axle. The leaf spring would sit on a spring seat like part # CES28WR (typically pre-welded on the axle), and would bolt on using a U-bolt kit like part # CE23002.
I have linked a few help articles for you below.
I hope this helps. Hit the reply button below and let me know if there is anything else I can do.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Shop: Spring Seat for Typical 3,500-lb, 2" Square Trailer Axles - Weld-On - Plain Steel
- Search Results: trailer hubs and drums
- Shop: Spring Seat for Typical 3,500-lb, 2" Square Trailer Axles - Galvanized Steel
- Search Results: spring seats trailer suspension parts
- Search Results: 14x55 wheels
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacing Suspension On 2020 Keystone 210 URS
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Article: Trailer Wiring Diagrams
- Q&A: Can 4,000 lb Leaf Springs Be Used with 3,500 lb Trailer Axle
- Q&A: Can Curt Multi Fit Hitch 13704 Install on Trailer with Boxed Frame 2025 NOBO 19.3
- Q&A: Can A 25-1/4" Leaf Spring Be Replaced With A 26" Leaf Spring?
- Article: How to Replace Trailer Leaf Springs in 5 Steps





Jesse M.
9/12/2025
Hey Richard, did you have a chance to measure the springs while they were unloaded and find out the weight capacity of your axle? I'm eager to hear how it worked out for you, as it could help others in a similar situation.