Recommended Replacement Leaf Springs for 26" Long Springs
Updated 01/05/2026 | Published 09/08/2024 >
Products Featured in This Question
Question:
I have a 2013 Lightening 4 place enclosed snowmobile trailer. Trailer weight plus allowable load = 7000. I presume I have two 3500 axles. Due to road salt everything needs replacing. Two questions: leaf spring length eye-eye loaded is 26 1/4, width is 1 3/4. Would the E54SR 25 1/8inch be the correct spring? Wheel center to center = 33 1/2inch loaded. And second, the axle very rusty measures 3 9/16inch in diameter which seems an odd size. Would CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2inch Long U-Bolts - Zinc part CE23002 fit? Planning on installing the Curved Equalizer for 1-3/4inch Wide Double-Eye Springs - 5-3/4inch Long - 9/16inch Center Hole part TREQ104 utilizing the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4inch Long Shackle Straps part MR46ZR.
asked by: Ole A
Expert Reply:
Ole, was that 26" eye to eye measurement you took under load? If it was, then there's a good chance that the 25 1/8" springs # e54SR is the right choice because the springs will elongate over time and under load.
If that 26" was not loaded, then you're going to want to go with the 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles # e27SR instead.
That is an odd sized axle as well. There are 3" axles which are typically 5,200 lbs to 7,000 lbs, 3 1/2" axles which are 8,000 lbs, and 4" axles which are 9,000 lbs, but no 3 9/16" axles. With your axle being an odd size, the CE Smith # CE23002 is not going to work.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: galvanized shackle
- Search Results: shackle
- Search Results: dexter spindle nut
- Search Results: tow shackles accessories and parts
- Search Results: axle spindle nut
- Search Results: shackle strap
- Search Results: trailer leaf springs
- Q&A: Recommended 26" Long 4-Leaf Double Eye Leaf Spring for a 4,000 lbs Axle on a Boat Trailer
- Video: Review of Redline Dust Cap Driver Tool - 290-992
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Shop: Lippert Spindle Nut Kit w/ Round Washer - For 2,200-lb to 4,400-lb Axles
- Q&A: Looking for Rust Resistant Replacement Leaf Spring, U-bolt Kit, and Hub for 3,500 lb Trailer Axle
- Video: Replacement Shackle Strap Feature Review
- Video: Let’s Check Out the Washer For 1" Spindle
- Video: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Video: An In-Depth Look at the Replacement Shackle Strap
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Q&A: Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
- Shop: Washer For 1" Spindle
- Shop: Trailer Spindle Nut 1"
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Q&A: U-Bolt Kit For Double-Eye Leaf Spring e48SR
- Q&A: Bear Aluminum Boat Trailer Replacement Axle and Suspension Parts For 3,500LB Tandem Axle Trailer
- Q&A: Nut Size Used on Dexter 3500 lb Hub and Drum Assembly
- Q&A: Looking For Replacement Leaf Springs For Single Axle Trailer
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long


Jameson C.
1/5/2026
Hey Ole, how did things turn out with the 4-leaf springs and the axle setup on your snowmobile trailer? Did the measurements under load line up with the fit you needed? Your update could make it easier for others replacing similar suspension parts.