Looking for Rust Resistant Replacement Leaf Spring, U-bolt Kit, and Hub for 3,500 lb Trailer Axle
Updated 02/10/2026 | Published 01/22/2026
Products Featured in This Question
Question:
Looking for a few parts for my boat trailer. I would like everything galvanized/rust resistance. GVWR on tag is 3500lb, single axle, 2x2 square V axle 14 wheel size Need: A Two eye to eye , three leaf springs B Two wheel hubs complete assemblies, five lug, 4 1/2 Bearing numbers in hubs are :L44649 and vL68149 3 Ubolts hardware kit and Bolt kit for leaf springs
asked by: GREG B
Expert Reply:
Hey Greg, welcome back! From a previous conversation you said you need a 25 inch long leaf spring so for one closest to that for a 3,500 lb axle you would want the part # e68SR for a galvanized spring that is 25-1/4 inches long. This is closest size we have to what you need and the extra 1/4 of an inch would not be a problem at all.
For the correct galvanized trailer hub you would want the part # AKIHUB-545-35-G-K and then for a galvanized u-bolt kit you'd want the part # CE23002. Do you rinse down your trailer at all after it's been in saltwater?
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Continue Researching
- Shop: Replacement Bolt and Sleeve Assembly for DeeMaxx 10K-12K Disc Brakes
- Shop: Replacement Dexter Axle Aluminum Caliper for 10" and 12" Disc Brakes
- Shop: Lippert Axle Kit - Brakes & Leaf Springs - Straight Spindle - 5-Lug - 95" - 3,500 lbs - Qty 2
- Shop: Lippert Axle Kit - Brakes & Leaf Springs - Drop Spindle - 5-Lug - 95" - 3,500 lbs - Qty 2
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 93" Long - 2,500 lbs to 3,500 lbs
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs
- Search Results: shackle
- Search Results: tow shackles accessories and parts
- Search Results: 3500 lbs trailer leaf springs
- Search Results: dexter spindle nut
- Search Results: axle spindle nut
- Search Results: shackle strap
- Search Results: trailer leaf springs
- Q&A: Recommended 26" Long 4-Leaf Double Eye Leaf Spring for a 4,000 lbs Axle on a Boat Trailer
- Video: Review of Redline Dust Cap Driver Tool - 290-992
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Video: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown
- Video: What to Know About the Zinc Shackle Bolt with Locknut for Double-Eye Springs
- Video: Let’s Check Out the Washer For 1" Spindle
- Video: Replacement Shackle Strap Feature Review
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Video: An In-Depth Look at the Replacement Shackle Strap
- Q&A: Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
- Q&A: Converting 3,500 lb Torsion Axle to Spring Leaf Axle on Boat Trailer
- Q&A: U-Bolt Kit For Double-Eye Leaf Spring e48SR
- Q&A: Looking For Replacement Leaf Springs For Single Axle Trailer
- Q&A: Replacement 25-1/2 Inch Leaf Springs and U-Bolt Kit For Travel Trailer With 3,500LB Axles
Jameson C.
2/10/2026
Hey Greg, how did the galvanized spring and hub setup work out on your boat trailer? It’d be great to hear if everything fit well with your axle and wheel size. Your update could make it easier for others working on similar saltwater trailers.