Latch to Use to Secure Fridge Door Shut 2024 Montana High Country 295RL

Question

Question:

Fifth wheel application 2024 Montana High Country, 295RL. What feature is there to secure the fridge doors while traveling? On several occasions the doors came open during travel causing the contents of the refrigerator to come out onto the floor of the RV. Not glass jar friendly.

asked by: David M

0

Expert Reply:

Hey David, we have fridge door latches like the Everchill part # 324-000149. This will keep the doors closed when you are traveling like you are needing. What brand fridge do you have?

expert reply by: Jameson C

0

Jameson C.

11/3/2025

Hey David, did the fridge door latch keep the doors on your Montana High Country secure while traveling? Your update could make it easier for others dealing with the same issue.

David M.

11/3/2025

Yes, it did. It really exceeded my expiation's. In my thinking I thought the plastic would not hold up to the pressure from heavy items in the fridge pushing against the door, but it does. I think this latch should be a better known add on to the RV industry.

Jameson C.

11/3/2025

@DavidM That's awesome! Glad it's working well for you.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Latch to Use to Secure Fridge Door Shut 2024 Montana High Country 295RL

Continue Researching