Replacement Landing Gear for a Genesis Supreme 32CR 5th Wheel Trailer

Updated 11/03/2025 | Published 01/16/2025

Question:

I have a genesis 32cr rated at 15,000 lbs loaded. I want to replace the original single motor with the bar across to the other side, i’m looking for a part number and what weight to use the 6,000 or 8000? Any ifo would be appreciated. Thanks

asked by: Alan R

Expert Reply:

Hey Alan! I would be happy to help you find a set of replacement landing gear for your Genesis Supreme 32CR 5th Wheel. The Lippert Electric Landing Gear Set item # LC333964 you were looking at would be a great option at a 6,000 lbs capacity.

The Lippert item # LC333964 comes with new brackets so it will fit. I can give you some measurements to check on your current set up though so you can see if this is compatible with your current mounts. The weld stops on it measures 15-1/2" inside to inside of the weld stops, and 17-1/2" outside to outside of the weld stops.

Please note that I do not have any way of knowing what landing gear you currently have on your 5th wheel trailer. There is no database that shows me this information.

I have linked a diagram below to show you exactly where to measure on yours. Feel free to email me directly or comment below if you have any additional questions.

expert reply by: Jerred H

Landing Gear
(click to enlarge)

Jerred H.

11/3/2025

Hey Alan, how did things go with the Lippert electric landing gear set for your Genesis 32CR? Were the weld stop measurements a good match for your current setup? Your update could make it easier for the next person working on a similar replacement.