Correct Trailer Wiring Kit for a 2025 Kia Carnival Hybrid

Question

Question:

Hi I need to make sure this connector will fit 2025 kia carnival hybrid before I buy Thanks

asked by: Rafiq B

0

Expert Reply:

Thanks for checking in with us, Rafiq!

The Curt Wiring Kit # CU94FR is for a standard 2025 Kia Carnival, but for your Hybrid you'll need the Curt Wiring Kit # C98RV instead.

Do you already have a hitch installed on your Carnival?

expert reply by: Jon G

0

Jon G.

11/3/2025

Hey Rafiq, did the Curt Wiring Kit for the Carnival Hybrid end up fitting the way you needed? Knowing how it worked could help others with the same vehicle.

Reply

Answer 1

Hey Jacob, sorry for any confusion but the correct trailer wiring kit you need for your 2025 Kia Carnival is the Curt part #CU94FR that you mentioned. The other part number was basically a preorder harness as we anticipated a new part number release…

view full answer...

Answer 2

Hey Charles, yes we do have the Curt trailer wiring harness part #C98RV that is a confirmed fit for your 2024 Hyundai Santa Fe.

view full answer...

Answer 3

It should be a fuse that is called trailer wiring right stop/turn circuit in the fuse box. It could also be cut wire up stream of the connector as well. I pulled up the owners manual for your 2011 Jeep Grand Cherokee and the only trailer towing fuse…

view full answer...

Answer 4

The Curt T-Connector #C56093 is a great place to start with wiring on your 2024 Ford Explorer. To get your vehicle ready for your trailer I recommend the following parts: - Universal Installation Kit #ETBC7 - Redarc Tow-Pro Liberty Brake Controller…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part #e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the…

view full answer...

Answer 8

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 9

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 10

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 11

Hey Frank, for your 2025 Hyundai Tucson the hitch I would recommend is the Curt part #C94WR which is mostly hidden, has great towing capacities, and also is priced lower. For trailer wiring I would then recommend the part #CU94FR for a 4-way or the…

view full answer...

Correct Trailer Wiring Kit for a 2025 Kia Carnival Hybrid

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching