Will Leaf Spring Bolt # 007-003-01 Work with Leaf Spring # e44SR
Updated 11/03/2025 | Published 01/05/2025 >
Products Featured in This Question
Question:
Will this work for your leaf springs part e44SR? Or do I need a 3 1/2inch bolt?
asked by: Rachel A
0
Expert Reply:
Hey Rachel, yes the bolt # 007-003-01 would work with the leaf spring part # e44SR. This 3 inch bolt is long enough since the leaf spring is 1-3/4 inches wide.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Shackle Bolt for 1-3/4" Wide Double Eye Springs - 9/16" Bolt Diameter - 3" Long
- Trailer Suspension Parts
- Shackle Bolts
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- Dexter
more information >
Continue Researching
- Q&A: Specs for the EMCO 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long EM26AJ
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Looking For Replacement Shackle Straps For 2016 Carson Trailer
- Q&A: Replacement 26 Inch Leaf Springs, Bushings, & Wet Bolts For Keystone Trailer
- Q&A: Do Slipper Springs Use Bushings on Both Ends?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Double-Eye Trailer Suspension System Review


Jameson C.
11/3/2025
Hey Rachel, how did the 3-inch shackle bolt work with your leaf springs? Knowing how the fit turned out could help others choosing the same setup.