Tekonsha Trailer Wiring Harness that Fits 2022 Mitsubishi Eclipse Cross

Question

Question:

2022 Mitsubishi Eclipse Cross will the TK29VR 4Flat Wiring Harness work for me ?

asked by: Doug K

0

Expert Reply:

Hey Doug, yes the Tekonsha trailer wiring harness part # TK29VR is a confirmed fit for your 2022 Mitsubishi Eclipse Cross. This will work great to provide you with a 4-way trailer wiring harness. It installs easily and has a very reliable converter box as well.

expert reply by: Jameson C

0

Jameson C.

11/3/2025

Hey Doug, how did the Tekonsha 4-way wiring harness work out on your Eclipse Cross? Your feedback could really help others looking for a simple trailer wiring setup.

Answer 1

No, you would not have to do any additional work in order to install the Tekonsha T-one #TK29VR on your 2023 Mitsubishi Eclipse Cross. You simply plug in the harness, insert the included in-line fuse, connect the ground wire to good clean metal and…

view full answer...

Answer 2

For your 2022 Eclipse Cross Randy, you're going to need the following parts: Hitch #DT97GR Wiring #TK29VR 7-way connector #ETBC7 Brake controller #RED52VR The above hitch is currently (7/7/2024) the only hitch available for your vehicle. The…

view full answer...

Answer 3

We have the Tekonsha trailer wiring harness part #TK29VR that is a fit for the 2022 Mitsubishi Eclipse Cross LE and would be a really great option. It installs easily and has a very reliable converter box as well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Tekonsha Trailer Wiring Harness that Fits 2022 Mitsubishi Eclipse Cross

Continue Researching