Looking for a Spare Tire Cover for the Provider ST235/80R16 Trailer Tire with Black Mod Wheel

Question

Question:

Do you have a spare tire cover for this size? prefer all black color

asked by: Abdul K

0

Expert Reply:

Hello Abdul,

For the Provider ST235/80R16 Trailer Tire with Black Mod Wheel - 8 on 6-1/2 # TA53MR you will want the Camco Vinyl Spare Tire Cover - 31-1/4" Diameter - Black # CAM45254. The # TA53MR is 30.79" in diameter, and the # CAM45254 fits up to 31-1/4" so it will be a great fit!

expert reply by: Kate F

0

Overall Measurement of Provider Tire # TA53MR
(click to enlarge)

Kate F.

11/17/2025

Hi Abdul, how did the Camco black vinyl spare tire cover fit on your Provider trailer tire? Your feedback could help others looking for the same size and color match.

Abdul K.

11/17/2025

@KateF the tire cover fits perfect without any issues. It covers the entire tire for all around protection from the elements. The 2 issues of concern are (1) when left on in the rain the cover traps a pool of water at the bottom and (2) be careful not to be too aggressive installing and removing the cover for the string is exposed. Too much stretching could break the string at the bottom so handle with care.

Kate F.

11/18/2025

@AbdulK I appreciate the response Abdul, and the pointers as well. Glad to hear your tires are staying protected from the elements.

Answer 1

Yes, the Tuf Combo License Plate Frame and Clear Shield #CR62051 will work well on your 2017 Ram 2500 SLT. For the hardware with grommets you can use the Anti-Rattle Fastener Kit #CR81400. I have attached a short video review on the license plate…

view full answer...

Answer 2

Hi Rogelio; you can use the Strider ST235/80R16 Radial Trailer Tire w/ 16" Revolver Black Mod Wheel #TA27AR you were looking at as long as the capacity and bolt pattern match your trailer. The psi rating doesn't really matter as long as the…

view full answer...

Answer 3

I did not find any results based on the part numbers you provided. I did, however, find a couple options for tail light assemblies and replacement tail light lenses that are close to 4" square. The Hopkins Passenger's Side #HM69501S and…

view full answer...

Answer 4

There are different angled cones for the wheel lug nuts found on trailer wheels and hubs. The most common lug nut cone degree is the standard 60 degree like the part #12CLN-L. We also the 90 degree cone with part #STN569.

view full answer...

Answer 5

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 6

We don't have the part #LG-XTB available in the exact length you mentioned but it sounds like you wouldn't have any problem cutting it down to the size you do need and drilling new holes for the pins if needed. If you are okay with a bit of…

view full answer...

Answer 7

We don't have CAD data available for any of our products but I can definitely help you out with the mounting bolt pattern on the Square A-Frame Jack w/ Footplate #TJDA-5000S. The holes are 3-1/2" on center with that foremost hole being a…

view full answer...

Answer 8

The 235/80R16 size tire, like the Karrier ST235/80R16 Radial Trailer Tire #AM34903, will measure about 30.8" for overall diameter and have a section width of 9.25". This tire/wheel combo has an 8 on 6-1/2" bolt pattern. If you need a…

view full answer...

Looking for a Spare Tire Cover for the Provider ST235/80R16 Trailer Tire with Black Mod Wheel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching