Does Draw-Tite Hitch for 2021 Hyundai Tucson Have Wiring Bracket

Question

Question:

Does this hitch, Drawtight 75836 for a 2021 Hyndai Tucson, come with bracket for the electrical plug?

asked by: David B

0

Expert Reply:

Hi David; the Draw-Tite Max-Frame Trailer Hitch Receiver # 75836 does not come with a bracket to mount the plug from trailer wiring. If you want to be able to mount a 4-way plug from your wiring # 118812 you will need to pick up the # 18144 separately.

expert reply by: Robin H

0

David B.

12/22/2024

Does the 11812 come with the bracket? All of my trailers have the round 6 prong plugs. Do you have the 6 prong version?

Reply

Robin H.

12/22/2024

@DavidB it does not come with a bracket. You can use the Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors # HM48625.

Reply

David B.

12/22/2024

@RobinH what wiring harness would replace the the 4 prong wiring harness for the 7-6 way wiring harness for a 2021 Hyundai Tuscan?

Reply

Robin H.

12/22/2024

@DavidB I'm guessing your trailers actually have a 7-way since a 6-way isn't very common. You would still need the 4-way with the # 118812. Then you will use the # ETBC7 to upgrade from a 4-way to a 7-way. This kit does include a mounting bracket.

Reply

Answer 1

To add a 2" hitch to your 2024 Tuscon Hybrid Limited, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…

view full answer...

Answer 2

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I am sure we have what you need, but I can't find anything based on the numbers you listed. Could you send me pics of the actuator with any part numbers displayed? Edit update: (see below for part number and pictures)

view full answer...

Answer 5

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

view full answer...

Answer 6

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 7

The 30205 bearing that you referenced has an inner diameter of just under 1 inch (0.985 to be exact). We do not have this particular bearing or a hub that uses this size bearing available. The #L44643 bearing that you also mentioned has an inner…

view full answer...

Answer 8

Hey Kevin, For a 2021 Hyundai Tucson I have the following recommendations: Trailer Hitch: etrailer Trailer Hitch Receiver #e54AR. ***Note this will not fit Night Edition models with dual exhaust tips*** 4-Pole Wire Harness: Curt T-Connector Vehicle…

view full answer...

Answer 9

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...