Mounting Hardware for Alumi-Tread Manual Pull-Out Step for RVs on 2017 DRV Mobile Suites

Question

Question:

What size bolts do I need for the Aluma- tread Quad steps going on a 2017 DRV Mobile Suites bolts for installing on my RV

asked by: Darwin K

0

Expert Reply:

Hi Darwin; the correct mounting hardware for the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 is the # LC118155-72. This includes four 3/8"-16 x 1" grade 5 carriage bolts and flange nuts.

expert reply by: Robin H

0

Robin H.

11/17/2025

Hey Darwin, how did things go with the mounting hardware for your Alumi-Tread steps on the DRV Mobile Suites? Knowing how the bolts fit could help others planning the same setup. Your update could make it easier for the next person with this step model.

Darwin K.

11/17/2025

Robin They are a great new step we really enjoy them. No more lifting heavy step and throwing all the dirt, leaves, twigs, grass, stones, water inside the RV. The lift up store inside the RV is the stupidist idea I ever seen these are beautiful you can open the door without letting down the heavy dirty steps and be able to just look inside. I did have to drill new holes none of the holes matched up but no proble works great. We really made a big improvement to the RV with removing the absolute stupidist store inside steps

Robin H.

11/18/2025

@DarwinK yeah the flip up steps are a nice idea but I definitely understand the frustration when the ground is dirty or wet. My trailer has steps like the Alumi-Tread on the bathroom entrance which is nice so you aren't getting that all inside the trailer. The main entrance doesn't, so sometimes we come back to a mess the next time we're using the trailer and I'm not a fan of that myself.

Answer 1

We don't have an install video but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of your…

view full answer...

Answer 2

We have two style of steps for RV's. We have scissor steps and pull out steps. None of them we offer are fiberglass, but I attached links to the right that will show you all of the ones we do carry.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 5

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Answer 6

Hey John! You weren't finding that SolidStep because Lippert discontinued it in 2024 and that table wasn't updated to reflect this. What I recommend instead is the MORryde StepAbove RV Steps #MR26RR. These are designed to fit 23-3/4" to…

view full answer...

Answer 7

The rise of each step of the Kwikee Steps #LC375821 is 8 inches.

view full answer...

Answer 8

Hello Erik, thanks for reaching out. According to my research, the Furrion Chill 8K FACR08HESA2-PS is for a ducted AC system, so you will need the ducted Chill Cube unit to replace it. That said, you will need a complete AC package that comes with…

view full answer...

Answer 9

Yes, the Blue Ox Replacement Chain Hangers item #BXW4020 are designed to work with all Blue Ox weight distribution systems. The lift brackets are specially designed for trailer frames that are 4" tall and widths up to 2-1/2" and where the…

view full answer...

Answer 10

Hey Kevin, What you had there was a Lippert 258998 triple step on your 5th wheel trailer. Lippert has told us that the correct replacement for this step is the Alumi-Tread Manual Pull-Out Step for RVs #LC432696.

view full answer...

Answer 11

There are both wired and wireless remotes for Fan-Tastic Vent RV roof vents and based on the pictures you've provided it looks like yours is wired. The remote snaps into the base and the base will have two screws holding it in place on the wall.…

view full answer...

Answer 12

The Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems #BXW4010 is not the best option for a C-channel frame. Instead I recommend the Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems - Clamp On or…

view full answer...

Mounting Hardware for Alumi-Tread Manual Pull-Out Step for RVs on 2017 DRV Mobile Suites

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching