What Hubs and Brakes Do I Need for My 1996 Gooseneck Trailer With 9K ALKO Axles?
Updated 12/15/2025 | Published 11/29/2024
Products Featured in This Question
Question:
1996 gooseneck. ALKO 9K axles. I’ve stripped out one hub where the studs go. I need a hub if possible. Also, brakes for both sides. Thanks for any help
asked by: Joseph M
Expert Reply:
Hello Joseph.
For your ALKO 9K axle, I am showing that would be a #99 Spindle, and would require bearings 28580 and 25580, we used to sell this hub, but we no longer have it. I recommend reaching out to our friends at Dexter, you are going to need their part number: 9080568, I would double check your bearing numbers to make sure they match. When you get over 8k on axles all kinds of things come into play, especially the date when it was manufactured. If you want to send me a picture of your axle tag, I am happy to double check.
For the brakes, you should have hydraulic drum, you will need the Hayes/AL-KO Hydraulic Brake Kit - Duo Servo - 12-1/4" - Left Hand/Right Hand - 9K to 12K # K23-524-00-2, I would double check that your has a 5 bolt flange.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath - Before July 2009
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 387A / 25580
- Standard Grade
- For 9000 lbs Axles
- For 10000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Trailer Wiring
- Q&A: Troubleshooting No Trailer Connected Issue with Factory Integrated Brake Controller
- Q&A: Do I Need a Load Resistor When Upgrading Trailer Lights to LEDs?
- Video: What to Know About the Adapter Module for BrakeRite Electric Over Hydraulic Actuator
- Search Results: 3 16 brake hose
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes - OEM - 1,000 psi
- Q&A: Electric Over Hydraulic Adapter Module For a 2024 Chevrolet Silverado 2500HD
- Q&A: Tires for a Tandem Axle Gooseneck Trailer with 25,900 lb GVWR
- Search Results: brake actuator
- Shop: Adapter Module for BrakeRite Electric Over Hydraulic Actuator - OE Ford, GM Brake Controllers
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Search Results: trailer safety chains
- Search Results: electric over hydraulic trailer brake controller
- Search Results: gooseneck landing gear
- Search Results: b&w hitch
- Search Results: gooseneck hitch trailer safety chains
- Shop: etrailer Square Jack wHandle - Foot Lever - Drop Leg - Spring Return - 12K Lift - 26.5" Travel
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Karrier KR35 ST235/80R16 Radial Trailer Tire - Load Range E
- Q&A: Repair Kit for etrailer Ram Jack # TJD-8000S
- Q&A: Solution for Needing Replacement Caliper for Kodiak 204 Caliper
- Q&A: What Is the Weight Capacity Of a Dexter D100G Axle
- Article: Trailer Wiring Diagrams
- Article: Anti-Rattle Devices
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Gooseneck to 5th Wheel Adapters
- Article: Double-Eye Trailer Suspension System Review
Kate F.
12/15/2025
Hey Joseph, were you able to find the replacement hub for your ALKO 9K axle after reaching out to Dexter? Knowing what worked could help others trying to match older axle parts.