Weight of Replacement Head for Equal-i-zer Weight Distribution 6,000 lbs/600 lb

Question

Question:

What is the physical weight of this head unit EQ90-02-0600 Just the head unit without ball or Shank

asked by: Keith J

0

Expert Reply:

Hi Keith,

The weight is 21.52 lbs for the Replacement Head for Equal-i-zer Weight Distribution Systems # EQ90-02-0600.

This is a replacement for Equal-i-zer weight distribution hitches with a 6,000 lb towing, 600 lb tongue weight capacity.

expert reply by: Kyle S

0

Jameson C.

12/15/2025

Hey Keith, did that 21.52‑lb replacement head work out for your Equal‑i‑zer setup? Knowing how it fit with your weight distribution system could help others looking for the same part.

Answer 1

Hello Keith, The weight of the Replacement Blue Ox TrackPro Weight Distribution Head #BLU68FR is 25.6 lbs while the Blue Ox TrackPro Weight Distribution #BLU35FR weighs 92.9 lbs. As for the differences between sway control, 2-point means there is…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Gary, thanks for reaching out. I see you already got the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE96XR but I wanted to make sure your question was answered. Yes, the Hellwig Big Wig Rear Anti-Sway Bar #HE96XR fits the 2026 GMC Sierra 3500…

view full answer...

Answer 8

I do have a solution, but we do not have either of the Draw-Tite hitches. Instead, I recommend the Curt Trailer Hitch Receiver #C15324 for your 2004 Suburban. This is also a Class V hitch. It has an even higher capacity when compared to Draw-Tite…

view full answer...

Answer 9

The #BP19-001 retaining clips are designed to fit the Dexter 7-inch brake magnets. Our contact at Dexter said the BP19-001 will work on both the 7-inch round and the 10-inch oval magnets. The replacement magnet clip, part #BP19005 will fit 10, 12,…

view full answer...

Answer 10

The 7 inch Dexter Brake Assemblies like the part #23-48 do use clips to attach the magnets to the assemblies. I went and pulled one from our warehouse and found that in order to attach the magnet to the arm you would need to slide the magnet over the…

view full answer...

Weight of Replacement Head for Equal-i-zer Weight Distribution 6,000 lbs/600 lb

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching