Which Android OS is Required for One Control App for Curt Echo

Question

Question:

I have a One control Auto app on a Galaxy 20+ running Android 13, and an Echo controller. In the app it says Android 14 or greater. Is there a work around this?

asked by: Jack G

0

Expert Reply:

Hi Jack; I'm looking at it in the Google Play Store right now and it says there is updated support for Android 14. However, that is not what is required. The current version lists the Required OS as "Android 9 and up" under app info.

expert reply by: Robin H

0

Jack G.

10/16/2024

Thanks Robin, Under the Custom-Designed App portion it says *IOS 9 or higher required, Android 14 or higher required. I'm wondering if this is why the Echo does not apply brakes when pedal is used.

Robin H.

10/16/2024

@JackG are you moving when the brake pedal is pressed? It is a proportional controller so if you press the brakes while stationary they won't activate. You would have to use the manual override. I have an S22 Ultra with Android 13 and it works for me.

Jack G.

10/16/2024

Thanks Robin, I really appreciate you taking the time with this. Yes when moving the trailer brakes do not apply when pressing the pedal. I have been using the app to use the trailer brake. When the Echo is hooked up I don't get a RR brake light, but it works when the Echo is removed. All connections have been cleaned. Any ideas?

Robin H.

10/16/2024

@JackG I'm not sure what is causing that problem. What I would do is call Curt at 877.287.8634 since they can help you actively troubleshoot over the phone while you're standing at the trailer. Their technical support is really helpful so they can sort it out or determine if it should be replaced under the limited lifetime warranty.

See All (4) Replies to Jack G. ∨

Answer 1

Hey Jason, I did some research and it looks like that trailer has a 3500lb axle. For electric brakes I recommend #AKEBRK-35-SA. This is a left and right hand assembly ready to slide on and add those to your axle. For the hub and drum assembly I would…

view full answer...

Answer 2

Since you have two 2,200 lb trailer brakes you should get two of the Dexter Electric Trailer Brake Kits #K23-103-104-00. These are good for 10", 12" and 13" wheels. This kit requires a mounting flange bolt pattern of 4" x 4"…

view full answer...

Answer 3

The entire process and required components for adding electric drum brakes to a trailer are outlined in the article that is linked at right. If the trailer has no brakes now you will need to add professionally installed brake mounting flanges (or to…

view full answer...

Answer 4

Hi Eric, The first step to adding brakes to a trailer is to check if your axle has a brake flange to mount the brake assemblies to. If your axle doesn't have a brake flange then you'll have to replace the axle with one that does. Assuming…

view full answer...

Answer 5

The first thing you will need to obtain is your bearing numbers. If you the inner bearing #L68149 and outer bearing #L44649 then I recommend the Titan disc brake kit and actuator #T4843100. This will give you the complete kit needed to switch over to…

view full answer...

Answer 6

Yes it makes sense and it is possible to just use a junction box with pre-installed 7-Way to connect your 91 Tundra with 7-way to the 4 flat on your trailer. I recommend Epicord 7-Way Molded Trailer Plug With Junction box part #277-000141. The molded…

view full answer...

Answer 7

Hey Mark, I'm assuming you're wanting a coupler lock for your trailer? If so, I recommend going with either the etrailer Trailer Coupler Lock - Flat Lip 1-7/8" and 2" Ball Couplers #e98897 or the #e98895 if you have a 2-5/16"…

view full answer...

Answer 8

We have everything that you will need to add electric brakes to your trailer that has a 3,500 lbs axle. It doesn't come in a complete kit but I will list the parts that you will need. A Brake Mounting Flange #4-35 will need to be welded onto the…

view full answer...

Answer 9

In order to add electric brakes to a trailer you must first determine the axle capacity which can be found on a tag located in the center of the beam. Assuming the axle has brake mounting flanges (welded to the spindle), you can then add brakes based…

view full answer...

Answer 10

Hey Scott, 2-5/8" between holes means it has the common 5 on 4-1/2" bolt pattern. Looks like you were checking out the Easy Grease Trailer Hub and Drum Assembly 3,500lbs 10" (5 on 4-1/2") #AKHD-545-35-EZ-K, which is spot on what…

view full answer...

Answer 11

Hi Paul; the EcoHitch #EH69CR will not fit your 2023 Ford Transit T350 since it is not compatible with EcoBoost models. The only option is to use the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH79CR.

view full answer...

Answer 12

Hello Robert, Let’s get you set up with a front hitch that works with your configuration. Since your Transit has the EcoBoost engine, the #EH69CR unfortunately will not be compatible. The correct fit for your 2021 Ford Transit 350 HD High Roof Crew…

view full answer...

Which Android OS is Required for One Control App for Curt Echo

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching