Does Air Lift Kit AL84JQ Fit 2024 Toyota Tundra TRD Pro

Question

Question:

Will this fit on a 2024 Tundra TRD Pro?

asked by: Jeremey H

0

TRD Pro
(click to enlarge)

Expert Reply:

Hey Jeremey, yes the Air Lift kit part # AL84JQ does fit your 2024 Toyota Tundra TRD Pro as we have confirmed this with Air Lift.

expert reply by: Jameson C

0

Jameson C.

12/22/2025

Hey Jeremey, how did the Air Lift LoadLifter 5000 work out on your Tundra TRD Pro? It’d be great to hear how the fit and performance turned out. Your update could make it easier for the next person with the same truck.

Jeremey H.

12/22/2025

@JamesonC It worked great! The bags took all of the drip out of the rear of the truck while hauling our camper with very low air pressure.

Answer 1

Hey Norbert congrats on the new truck! Out of those two air compressors I would go with the Air Lift WirelessONE Compressor System for Air Helper Springs item #AL25980EZ over the item #AL25980 because it includes all of the mounting hardware. If you…

view full answer...

Answer 2

Hey Chad, Good question and you will need spacers for your 2024 Toyota Tundra with the factory lift when installing the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ. The rear lift on the Tundra is 2 inches…

view full answer...

Answer 3

Hey Sc, checked with Air Lift and you do not have to use a spacer kit with the LoadLifter 5000 kit part #AL24JQ on your 2022 Toyota Tundra TRD Pro. Will you be towing a trailer?

view full answer...

Answer 4

Great question. Both the #AL24JQ and #AL84JQ are the 5,000 lb capacity kits for a 2024 Toyota Tundra. The AL84JQ is the standard LoadLifter 5000 kit. The #AL24JQ is the LoadLifter 5000 Ultimate kit. Meaning the air bags feature internal jounce…

view full answer...

Answer 5

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL24JQ is the best suspension enhancement for your 2024 Toyota Tundra. These air springs feature internal jounce springs which help to eliminate the bouncing which is common with other air bag…

view full answer...

Answer 6

If you are looking at an Air Lift 5000 Ultimate Plus like the #AL89288, you will be able to use the Air Lift Union Tee for 1/4" Air Lines #AL21838, but you will have to connect the nylon lines to the actual tee connection point. Then after the…

view full answer...

Answer 7

All you need to do that is the union tee part #AL21838 to pull that off. You'd run the air line from both bags to it and then the inflation line from the valve stem to the center tee and you'd be set. For nearly all people this is the easier…

view full answer...

Answer 8

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Does Air Lift Kit AL84JQ Fit 2024 Toyota Tundra TRD Pro

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching