Does The Weigh Safe 180 Hitch 6" Drop Hitch Come With Two Ball Sizes?

Question

Question:

Does this come with 2 different ball suize? Thanks

asked by: John

0

Expert Reply:

Hello John, thanks for reaching out. The 180 Hitch 6" Drop Hitch w/ 2.5" Shank # WS44MR comes with a 2" and a 2-5/16" ball. Both balls come together as one piece, as you can see in the picture below.

expert reply by: Jesse M

0

weigh safe dual ball
(click to enlarge)

Jesse M.

12/22/2025

Hey John, how did the 180 Hitch with the 2 and 2-5/16 balls work out for your setup? Knowing how it performed could help others deciding between ball sizes for their hitch.

Answer 1

Hi Don; the difference between the #WS44MR and #WS82CR is the actual hitch balls. The #WS82CR has a stainless steel double-sided tow ball and the #WS44MR has a chrome-plated double-sided tow ball. Personally I would get the stainless steel option so…

view full answer...

Answer 2

Hey Mike. We have an anti-rattle device that works really well with a B&W Tow & Stow that is compatible with a GM MultiPro Tailgate like item #BWTS20066BMP. It's not a clamp on style though. It's the XL Anti-Rattle Trailer Hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Does The Weigh Safe 180 Hitch 6" Drop Hitch Come With Two Ball Sizes?

Product Page this Question was Asked From

Continue Researching