Will Leer Tonneau Cover LE67FR Fit Chevy Silverado 2500 and Allow Use of Fifth Wheel

Question

Question:

I have a 2020 2500hd Silverado 6.6l gas standard bed 6.9. Will the Leer Quad Fold cover work with a 5th wheel camper? That is still lay flat and not up blocking the rear window.

asked by: Randy S

0

Expert Reply:

Hey Randy, yes the Leer quad fold tonneau part # LE67FR that its your 2020 Chevy Silverado short bed will allow you to use your fifth wheel hitch when folded up but not all the way against the rear window. With that last panel folded down you'd have access to the bed enough to use your fifth wheel hitch.

expert reply by: Jameson C

0

Randy S.

10/7/2024

Ok, thanks! What other folding tonneau covers would work on my 2020 2500hd Silverado standard bed truck?

Jameson C.

10/8/2024

@RandyS I attached a link to all of the soft and hard folding tonneau covers that fit your 2020 Chevy Silverado 2500HD short bed.

Helpful Links

tonn-2020_chevrolet_silverado+2500.htm?style=6-3%2f4+foot+bed&furl=-sf-fold~up_~_hard

tonn-2020_chevrolet_silverado+2500.htm?style=6-3%2f4+foot+bed&furl=-sf-fold~up_~_soft

Randal

10/7/2024

And do they all have the rails?

Jameson C.

10/8/2024

@Randal All of the tonneau covers I mentioned in the other message do come with the needed install rails.

Answer 1

Hi Kyle; we don't carry an adapters but what you can do is install the Roadmaster 12 Volt Outlet Kit, 20 amps #RM-9332. This ensures constant, reliable power for the camera system. It gets harder and harder to trust those adapters as random…

view full answer...

Answer 2

These 5th wheel hitches are extremely similar with only a couple differences. Both of them fit the factory puck systems in the 2024 Chevy Silverado 3500. I have linked a diagram below from Curt that lists the similarities. The main difference between…

view full answer...

Answer 3

Yes, the BAKFlip FiberMax Hard Tonneau Cover - Folding - Aluminum and Fiberglass #BAK1126133 can be used in various fold positions. I have attached a couple photos for you to check out which show the cover being used in the 1/4 and 2/4 positions.…

view full answer...

Answer 4

For a 2024 Chevy Silverado 2500 with a 6-3/4' bed I have two recommendations depending on whether you'd like a hard top or soft top. For the hard top I recommend the Lomax Hard Tonneau Cover #LO79FR. For the soft top I recommend the TruXedo…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hi Richard! From the top of the shank to the lowest part where the tri-ball sits on the #BWTS20067BMP is 11.125". If you have the balls at max drop with the tallest one hanging down that would be 12.5". We recommend at least 11" of…

view full answer...

Will Leer Tonneau Cover LE67FR Fit Chevy Silverado 2500 and Allow Use of Fifth Wheel

Product Page this Question was Asked From

Continue Researching