Customers compare BWTS20066BMP to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this B&W Tow & Stow two ball mount. Now this is going to slide into your 2-1/2 inch by 2-1/2 inch trailer hitch on your vehicle. It's gonna provide the connection point for your trailer coupler. You can see we do have the two different size balls here. You've got a two inch ball and a 2-5/16 inch ball that will… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The B and W Tow n Stow part #BW44FR does work with the GM Multi Pro Tailgate but it fits the 2 inch hitch size whereas your husband's 2022 GMC Sierra 2500 would have a 2-1/2 inch hitch size so the correct part number to get would be the part…
view full answer...Hey Thea, sorry to hear about the B and W Tow n Stow part #BWTS20066BMP not fitting super tight in your hitch. This generally isn't a quality issue though as it can be that the tolerances of the hitch it's installed in are too loose. You…
view full answer...There is indeed a B&W Tow & Stow ball mount that gives up up to 4-1/2 inches of drop and works with your GMC MultiPro tailgate; what you need is the following part number: - B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch -…
view full answer...I have a solution for an adjustable ball mount that is compatible with the GMC MultiPro tailgate, but there is not one that has a specific 5" drop position. It appears you were looking at the B&W Tow & Stow for MultiPro Tailgates…
view full answer...You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…
view full answer...The Equal-i-zer Weight Distribution System part #EQ37100ET and Blue Ox SwayPro Weight Distribution System part #BXW1000 are both great options. However, in regards to combating trailer sway the edge has to go to the Equal-i-zer because it has true…
view full answer...Yes, the perfect solution for you is the B&W Tow & Stow 2-Ball Mount #BWTS20066BMP, which is specifically designed to work with the GM MultiPro Tailgate. As you can see int the attached photo, the angled design provides clearance for the…
view full answer...For the 2-1/2 inch hitch size B and W only makes the one size drop for the Tow and Stow Ball Mount for the GM MultiPro Tailgate with the part #BWTS20066BMP that you referenced. This is a very specific application so B and W decided to go with a…
view full answer...Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…
view full answer...The brake signal is run along with the blinker on separate wires. The passenger side is normally green and carries the right turn and brake light. The driver's side is normally yellow and carries the left turn signal and brake. The remaining…
view full answer...The original B&W Tow & Stow, like the #BW54FR didn't work well with your tailgate, as the front face of the shank would contact the tailgate which isn't good. The excellent news is that B&W has developed a Tow & Stow model…
view full answer...Even Though The Curt Trailer Hitch Receiver #C13240 is rated for a 525 pound tongue weight, since your vehicle's manual states that you have a maximum tongue weight of 220 pounds you 100% can not exceed the 220 pounds. So I do not recommend…
view full answer...