What Equal-i-zer System Should I Use For Trailer With 1,000 lbs on Tongue Weight?
Updated 12/22/2025 | Published 09/30/2024
Question:
I purchased the 14000 / 1400 equalizer, I am picking up my new travel trailer this weekend and will load it and then weigh the tongue, If my tongue weight is around 1000 what all do I need to make my system a 12000 / 1200 unit. Do I just need the 12000lb head, it looks like the arms are the same on both the 12000 and 14000 models.
asked by: RYAN P
Expert Reply:
Hello Ryan, thanks for reaching out. If your tongue weight is 1,000 lbs you can go ahead and use your 14,000 lbs Equal-i-zer system # EQ37140ET. This is intended for trailers with a tongue weight between 1,000 and 1,400 lbs, so as long as your are within that range, you will get good, effective ride leveling and sway control.
If your tongue weight is under 1,000 lbs, just get two of the # EQ90-02-1099 spring bars and that will be all you need to convert it over. The # EQ90-02-1099 bars are for between 600 and 1,000 lbs tongue weight. The L-brackets and head are the same.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: 2 5 16 ball
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Shop: Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Q&A: What are the Dimensions of 1000 Pound Equal-I-Zer Spring Bar # EQ90-02-1099
- Search Results: equalizer spring bars
- Search Results: equalizer
- Video: All About the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems
- Q&A: Can a Lubricant be Used With an Equalizer Weight Distribution Hitch?
- Shop: Replacement Pin and Clip for Equal-i-zer Weight Distribution Spring Bars
- Shop: Replacement Spring Bar for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
on Weight Distribution Hitch
Jesse M.
12/22/2025
Hey Ryan, how did things go with your Equal-i-zer setup after you picked up the new travel trailer? Did the 14,000-lb system give you the ride leveling and sway control you were looking for? Your update could make it easier for others working through the same weight range.