Replacement Remote Receiver For Retrax Tonneau Cover Model 4100-017

Question

Question:

I have a retrax bed cover it was on a truck when I purchased it. No remote was included can I purchase a remote without replacing the receiver? Or can I reprogram a remote?

asked by: Lonnie B

0

Retrax Bed Cover Sticker
(click to enlarge)

Expert Reply:

Hello Lonnie. If your cover did not come with a remote, you will need to replace the receiver. Based on your model number 4100-017, the correct remote receiver kit would be part # RTX89TR.

expert reply by: Jesse M

0

Answer 1

I checked with my contact at Retrax and they ran your serial number. They confirmed that the F09-2027 will be the correct remote receiver kit for your cover. We have this listed under part #RTX89TR, so it looks like you were on the right track in the…

view full answer...

Answer 2

Hey thanks for reaching out, Jeremy. It does not sound like a motor issue since the cover can open and close normally. This is a problem with the remote or with the receiver. The only fix for this is a replacement. The Replacement Remote Receiver for…

view full answer...

Answer 3

Hi Edward; we have the Replacement Remote Receiver for Retrax Powered Retractable Tonneau Covers Manufactured After 2017 #RTX89TR available. More than likely this will work for your cover but it would be a good idea to check the serial number. The…

view full answer...

Answer 4

Yes, I can help you out with a new remote receiver for your Retrax cover on your 2021 GMC Sierra. - Replacement Remote Receiver for Retrax Powered Retractable Tonneau Covers #RTX89TR The Replacement Remote Receiver for Retrax Powered Retractable…

view full answer...

Answer 5

Be sure to also check any paperwork/manuals for your Retrax Powered Retractable Tonneau Cover. If you do not have this number anywhere or do not know if the cover was manufactured after 2017 for the Receiver #RTX89TR, you will most likely need a new…

view full answer...

Answer 6

The outside diameter of the fitting of the #RE64FR drain tube is 7/8 of an inch. You can see a product description video for the drain tube by clicking the provided link.

view full answer...

Answer 7

It might David but I have no way of knowing for sure without that serial number. The Replacement Key Fob item #RTX36TR matches up with covers that have a serial number of 1701 or higher. There's no other way to identify if this is the one you…

view full answer...

Answer 8

Hey Shawn, I reached out to Retrax for you and they confirmed that since you already have the receiver you'll just need the replacement key fob to get it working again. The correct part number for that is the following: - Replacement Key Fob -…

view full answer...

Answer 9

I spoke to my contact at Retrax and they informed me that there is no manual release on the PowertraxONE MX Hard Tonneau Cover part #RT70243 for your 2019 Ram 1500 if you were to lose power to the motor. However, we do have a powered retractable…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Remote Receiver For Retrax Tonneau Cover Model 4100-017

Product Page this Question was Asked From

Continue Researching